Jump to content
We Need Your Help! ×

  • entry
    1
  • comments
    3
  • views
    1,357

Class 1 or 2?????


zcarlady1

976 views

I have a beautiful 71 240. People keep asking if it is a class 1 or 2. Would someone help me. The vin is HLS3029707? Thanks

3 Comments


Recommended Comments

Welcome to the club!!!

Please post some pictures when you get the chance!

I think you mean series 1 or series 2.

Quoted from Carl Beck as posted at

www. zhome.com/History/1970or1971.html

"There Are Four Series Of Datsun 240Z's.

THE SERIES I 240Z's - Produced from Oct. of 1969 through Dec. of 1970. They are identified by the fresh air exhaust vents located on the rear hatch. (some of these cars were also produced in the first few weeks of Jan. 1971 during the transition period) They have plastic covers for tools and jack located behind the seats, steering wheels with indents, rather than holes.

The Series I 240Z's were sold and titled as 1969, 1970 and 1971 Model Year Cars here in the U.S. and North American Markets. (as they complied with all U.S. Emissions and Safety standards in effect for those years. There was not much change in the standards for those years.)

Cars that arrived at the U.S. Ports after Sept. 1 1970, could legally be, and were, sold as 1971 Model Year Cars. (they could also have been, and were, legally sold as 1970 Model Year Cars! - however very few of them were, due to the price increase on the 1971 Model Year cars. ).

THE SERIES II 240Z's were produced from Jan. 1971 through Aug. of 1971. They are identified by the fresh air exhaust vents relocated to the side or "C" pillar of the car, from their prior position on the rear deck lid. The tools and jack were re-located to pockets in the rear deck area and the steering wheels have holes, where the indents were on the Series I cars.

These cars were also sold as 1971 Model Year Cars here in the U.S....So both Series I and Series II Z Cars were sold as 1971 Model Year cars.

THE SERIES III 240Z's were produced from Aug. 1971 through Sept. of 1972. These cars are identified by the re-designed center console with the ash try behind the shift lever (because of the use of the newer "B" style transmissions, cig. lighter moved to the dash.

These cars were all sold as 1972 Model Year cars, because they complied with the 1972 Safety and Emissions standards only.

THE SERIES IV 240Z's were produced from Sept. of 1972 through Sept. of 1973. They can be identified by the 2.5 MPH bumpers which extended away from the body, and had larger bumper over-riders. Also all 1973 model year cars had VIN#'s beginning with HLS30 120xxx as major changes to the emissions and safety laws took place in 73.

So the "actual" answer to the questions, "What Year Is My Z?" or "Is My 240Z a 70 or 71?" is actually determined on the Series I cars, by how the Request For Title was filed by the selling dealer, supported by the original Manufactures Statement of Origin (MSO) and the date of Delivery to the Authorized Dealer.

The answer to these questions, as it relates to the Series III and Series IV cars, was determined by compliance with the changing emissions and safety standards for 1972 and 1973 Model Years cars. So all series II cars were sold as 1971 Model Year cars (because they were produced after Jan.1, 1971). All series III cars were by law (Federal) sold as 1972 Model Year 240Z's and all Series IV cars were sold as 1973 Model Year cars.

Some Interesting Facts and Figures:

It would appear from our records so far, and supported by the research of others, that approximately 10,000 Series I 240Z's were imported and sold as 1970 Model Year cars. The remainder of the 19,000+ units were sold/titled as 1971 Model Year cars.

Z Car HLS30 11618 is the latest VIN that we have found which was sold and titled as a 1970 Model Year car (built date 10/70 and Sold/Delivered 12/70)

Z Car HLS30 05504 (build date 06/70 and Sold/Delivered 08/70) is the earliest car found so far that was sold/titled as a 1971 Model Year Car.

You can see that there is an overlap in the build dates and VIN's of the first two "Model Years", however for the most part, cars built on or after 09/70, with VIN numbers above HLS30 010031, were sold as 1971 Model Year cars.

Is a 1970 240Z more collectable than a 1971 240Z?

As not too many people are fully aware that there are two "Series" involved in the 1971 Model Year cars, for the most part, the answer to that question is YES at the present time. As the Model Year limits the quantity available, the 1970 240Z's will retain more of their value, and will be easier to re-sell over the short term. (three to five years)

However, if the Z Cars follow the patterns established by other imported collectibles, then the Series I cars will, as a group, be recognized as the Original Z design... and for the most part the Model Year under which it was titled, will not matter as much as it does today. "

Will

Link to comment

Will,

Outstanding response to a simple question!

Your time to add the extra historical info is well appreciated by most of the people that use this site.

I would say that your data bank of details might be able to compete with the likes of Carl Beck.

Ron

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Blog Statistics

    • Total Blogs
      167
    • Total Entries
      251
  • Blog Comments

    • I'm still waiting on a hoist to free up before I can start bolting the new brake parts on my Z, but I did make the drill jig today.  I started with a 12mm thick Mustang wheel spacer with a pilot.  I then made a drawing to layout the holes needed.  I transfered the drawing onto the spacer and I drilled three new 1/8" holes through the jig (spacer) so I'd have the correct 4x114.3mm holes.  One hole is shared from the original 5 lug rotor.  I then bolted the jig onto the Mustang rotor and simply dr
    • Local radiator repair shops used to be plentiful but getting harder to find.  Some of them just specialize in big truck-heavy equipment radiators.  I will be needing to do the same for my project.  I have heard good reports on gas tank RENU but there are none of those franchises in my area.  Good luck, John-Lugoff, SC
    • Decided to go with the 240sx conversion. Main reason is it’s strictly for the street and the parts were easy to source. What I didn’t realize was the 14” wheels won’t clear the caliper. Now looking for a set of 4 lug 15” rims and tires I can use during the build process. Can anyone recommend a temporary solution as far as make and model preferably a steel wheel that I can use until I’m ready to buy the wheel and tire combination at the end of the project? Thanks again for all the help out there.
    • There are several reasons to use the S197 rear brakes.  The rotors are larger diameter than the SVO rotors and they are vented.  The calipers have larger pistons to give them more power.  The big beef with the Maxima rears is that they don't offer as much stopping power as the stock drums.  The S197 rears allow the addition of an adjustable proportioning valve.  The Maxima rears cannot utilize an adjustable prop since the prop needs to be all the way open to get close to enough rear bias. 
    • Any particular reason to use S197 Mustang 5-lug brakes?  The Fox body SVO Mustangs had rear discs with 4-lug.  It's a popular swap to use SVO or T-bird Turbo Coupe rear brakes to retrofit discs to other Fox body Mustangs.  These parts are still pretty common (probably available as a kit).  Might be worth checking to see if they'll fit.
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.