Jump to content
We Need Your Help! ×

Blog ConchZ

  • entries
    8
  • comments
    5
  • views
    2,367

Still Waiting


ConchZ

828 views

The car has been in the body shop since the first week of January. Its getting close to done. The floors have been replaced. The right rear quarter has been replaced. Its been stripped, sanded, blocked, primed, sealed and then sprayed with three coats of 115 blue, with three coats of clear. Problem is, the clear has some little specks in it that wet sanding didn't take out. More wet sanding, then more clear coats. Happily the shop didn't even think of passing it off to me, they just called and said they had to redo it. It'll get done next week, hopefully. I know the rule, you can do it cheap, good, or fast, pick only two.

Meanwhile, Les at ClassicDatsun has been helping me put together my pile of parts to go back on the car. He has a chrome shop next door, so he was nice enough to handle rechroming the bumpers for me. This chrome shop still has its copper-cyanide tanks. They first welded shut all holes in the bumpers (no more rubber strips or bumperettes), then layed down some copper. After it was all done, they painted the backs. Hopefully they will not corrode in this salt air down here. They look great.

I bought all new interior vinyl from Les and white leather seat upholstery and new foam cushions. You would think you could put the seats together yourself, but I couldn't get it to look right. I took it to an uphostery shop. They look great now. I got to sit in them today, and they felt great. I had to put the drivers seat in the car in order to test fit the MSA chrome Bullet II mirrors. Good thing. If you mount these in the old mirror's location, they'll be too far back on the door to use them easily. They need to go forward as far as possible on the door. Not too far forward, or they'll bump the fender when you open the door, though.

Once the car is resprayed with clear, it should be given back to me for interior work. I plan to Raamat and Ensolite most of the interior, with the goal of getting it quiet enough to listen to the Alpine stereo without having to crank it.

I had a hard time deciding what color to paint the grill and tail light panel. The car is a high gloss metalic blue, with excellent chrome trim and bumpers. Most people seem to paint these some version of black. The shop did a motorcycle tank in Hot Rod Black, and I knew that was it. It's black, but a bit different than usual. See attached picture. The bumper isn't on it yet, but I think it'll contrast nicely with all the shine on the rest of the car.

So I wait. Shouldn't be long now...but I've been saying that for a month. The good news is that my birthday is coming up, and my wife wants to by me some new wheels. Probably going to get Konig Rewinds, but am open to suggestions.

1 Comment


Recommended Comments

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Blog Statistics

    • Total Blogs
      167
    • Total Entries
      251
  • Blog Comments

    • I'm still waiting on a hoist to free up before I can start bolting the new brake parts on my Z, but I did make the drill jig today.  I started with a 12mm thick Mustang wheel spacer with a pilot.  I then made a drawing to layout the holes needed.  I transfered the drawing onto the spacer and I drilled three new 1/8" holes through the jig (spacer) so I'd have the correct 4x114.3mm holes.  One hole is shared from the original 5 lug rotor.  I then bolted the jig onto the Mustang rotor and simply dr
    • Local radiator repair shops used to be plentiful but getting harder to find.  Some of them just specialize in big truck-heavy equipment radiators.  I will be needing to do the same for my project.  I have heard good reports on gas tank RENU but there are none of those franchises in my area.  Good luck, John-Lugoff, SC
    • Decided to go with the 240sx conversion. Main reason is it’s strictly for the street and the parts were easy to source. What I didn’t realize was the 14” wheels won’t clear the caliper. Now looking for a set of 4 lug 15” rims and tires I can use during the build process. Can anyone recommend a temporary solution as far as make and model preferably a steel wheel that I can use until I’m ready to buy the wheel and tire combination at the end of the project? Thanks again for all the help out there.
    • There are several reasons to use the S197 rear brakes.  The rotors are larger diameter than the SVO rotors and they are vented.  The calipers have larger pistons to give them more power.  The big beef with the Maxima rears is that they don't offer as much stopping power as the stock drums.  The S197 rears allow the addition of an adjustable proportioning valve.  The Maxima rears cannot utilize an adjustable prop since the prop needs to be all the way open to get close to enough rear bias. 
    • Any particular reason to use S197 Mustang 5-lug brakes?  The Fox body SVO Mustangs had rear discs with 4-lug.  It's a popular swap to use SVO or T-bird Turbo Coupe rear brakes to retrofit discs to other Fox body Mustangs.  These parts are still pretty common (probably available as a kit).  Might be worth checking to see if they'll fit.
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.