Jump to content
We Need Your Help! ×

  • entry
    1
  • comments
    5
  • views
    2,913

Charcoal paint code for hub caps and trim on Z cars?


Michael's Zcar

2,240 views

I am trying to find out the correct paint codes/chips for hubcaps and trim for all early Z cars. I believe the manufacturer may be Dupont, and it seems to be some sort of flat or satin charcoal. Any suggestions or ideas would be much appreciated.

Also, if anyone knows a way to find out the original stock rim/wheel size for a 1975 280Z, please let me know! My intention is to put original stock rims with hubcaps back on my car, so I would also like to know the size of the widest tire I can put on the original rims.

Thanks

Michael

5 Comments


Recommended Comments

I don't know the paint code but I did stumble upon a website[Jeff Lilly Restorations] that has info on all types and brands of different colors of silver spray and their different uses. Well worth checking out.

Mark in Portland

Link to comment

I think that this is the original formula by Ditzler as stated in Wick Humble's book "How to Restore Your Datsun Z Car".

I think Ditzler merged with, or was taken over, by PPG.

Ditzler Duracryl DDL 2862 Argent with quite a bit of suede additive.

1 pint DDL

200 units DX265

300 units DX 264

Thin 100-150% and spray fairly dry.

Regulate air pressure to the high side

Make sure you keep the paint mixed in the cup

Don't expect any gloss as it shouldn't have any

Unmask as soon as the paint has "flashed over" so you don't run into problems when you remove the tape.

Do a Google search of "Ditzler Duracryl DDL 2862 Argent" and you'll see this has been discussed several times.

HTH

Jim D.

"Zup"

Link to comment

Hi Mark,

Thanks very much for your Z wisdom - I'll check out the website and see if I can track down the code there.

Thanks,

Michael

I don't know the paint code but I did stumble upon a website[Jeff Lilly Restorations] that has info on all types and brands of different colors of silver spray and their different uses. Well worth checking out.

Mark in Portland

Link to comment

Hey Zup,

Thanks very much for your Z wisdom - I'll follow up and do a search on "Ditzler Duracryl DDL 2862 Argent." I'll see if I can find Wick Humble's book as well - sounds very useful.

Thanks,

Michael

I think that this is the original formula by Ditzler as stated in Wick Humble's book "How to Restore Your Datsun Z Car".

I think Ditzler merged with' date=' or was taken over, by PPG.

[b']Ditzler Duracryl DDL 2862 Argent with quite a bit of suede additive.

1 pint DDL

200 units DX265

300 units DX 264

Thin 100-150% and spray fairly dry.

Regulate air pressure to the high side

Make sure you keep the paint mixed in the cup

Don't expect any gloss as it shouldn't have any

Unmask as soon as the paint has "flashed over" so you don't run into problems when you remove the tape.

Do a Google search of "Ditzler Duracryl DDL 2862 Argent" and you'll see this has been discussed several times.

HTH

Jim D.

"Zup"

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Blog Statistics

    • Total Blogs
      167
    • Total Entries
      251
  • Blog Comments

    • I'm still waiting on a hoist to free up before I can start bolting the new brake parts on my Z, but I did make the drill jig today.  I started with a 12mm thick Mustang wheel spacer with a pilot.  I then made a drawing to layout the holes needed.  I transfered the drawing onto the spacer and I drilled three new 1/8" holes through the jig (spacer) so I'd have the correct 4x114.3mm holes.  One hole is shared from the original 5 lug rotor.  I then bolted the jig onto the Mustang rotor and simply dr
    • Local radiator repair shops used to be plentiful but getting harder to find.  Some of them just specialize in big truck-heavy equipment radiators.  I will be needing to do the same for my project.  I have heard good reports on gas tank RENU but there are none of those franchises in my area.  Good luck, John-Lugoff, SC
    • Decided to go with the 240sx conversion. Main reason is it’s strictly for the street and the parts were easy to source. What I didn’t realize was the 14” wheels won’t clear the caliper. Now looking for a set of 4 lug 15” rims and tires I can use during the build process. Can anyone recommend a temporary solution as far as make and model preferably a steel wheel that I can use until I’m ready to buy the wheel and tire combination at the end of the project? Thanks again for all the help out there.
    • There are several reasons to use the S197 rear brakes.  The rotors are larger diameter than the SVO rotors and they are vented.  The calipers have larger pistons to give them more power.  The big beef with the Maxima rears is that they don't offer as much stopping power as the stock drums.  The S197 rears allow the addition of an adjustable proportioning valve.  The Maxima rears cannot utilize an adjustable prop since the prop needs to be all the way open to get close to enough rear bias. 
    • Any particular reason to use S197 Mustang 5-lug brakes?  The Fox body SVO Mustangs had rear discs with 4-lug.  It's a popular swap to use SVO or T-bird Turbo Coupe rear brakes to retrofit discs to other Fox body Mustangs.  These parts are still pretty common (probably available as a kit).  Might be worth checking to see if they'll fit.
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.