Jump to content
Email-only Log-Ins Coming in December ×

Welcome Guest! Please read more information about our club!
  • entry
    1
  • comments
    5
  • views
    1,562

Mechanic in San Francisco Bay Area for a 240Z

Joe Moreland

Entry posted by Joe Moreland

1,174 views

 Share

We are looking for a mechanic in the San Francisco Bay Area, preferable Marin County, that can work on a 1972 240Z. Our previous mechanic retired. Can you recommend anyone?

 Share

5 Comments

Recommended Comments

Thecabtsmith

Greg Scott at Scott Performance in Santa Clara/ might be san jose. He has been around for years and really knows his stuff. He was my mechanic for 12 years till I had to sell my Z. I just got another one and wish I still lived close by. He will not disappoint you.

Link to comment
Thecabtsmith

My name is Gregg Smith

I had a 71'. he built a 3.1 with a 5 spd for me. What a rocket!!! The torq was incredible. Car was pearl white. He did the restoration in 1994-95. Wound up selling it to one of his other customers.

Link to comment
gaffo

I just had mine rebuilt in Santa Rosa. If you would like more information please let me know. GAFFO

Link to comment
montanagrl

I would also recommend Rob Fuller with Z Car Garage. He's awesome and totally committed to caring for your vehicle like you would or even better.

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Blog Statistics

    • Total Blogs
      167
    • Total Entries
      251

  • Blog Comments

    • Jeff G 78
      280z Disc brake conversion

      By Jeff G 78 · Posted

      I'm still waiting on a hoist to free up before I can start bolting the new brake parts on my Z, but I did make the drill jig today.  I started with a 12mm thick Mustang wheel spacer with a pilot.  I then made a drawing to layout the holes needed.  I transfered the drawing onto the spacer and I drilled three new 1/8" holes through the jig (spacer) so I'd have the correct 4x114.3mm holes.  One hole is shared from the original 5 lug rotor.  I then bolted the jig onto the Mustang rotor and simply dr
    • One Way
      Looking for a 1978 280z Gas Tank

      By One Way · Posted

      Local radiator repair shops used to be plentiful but getting harder to find.  Some of them just specialize in big truck-heavy equipment radiators.  I will be needing to do the same for my project.  I have heard good reports on gas tank RENU but there are none of those franchises in my area.  Good luck, John-Lugoff, SC
    • Yarb
      280z Disc brake conversion

      By Yarb · Posted

      Decided to go with the 240sx conversion. Main reason is it’s strictly for the street and the parts were easy to source. What I didn’t realize was the 14” wheels won’t clear the caliper. Now looking for a set of 4 lug 15” rims and tires I can use during the build process. Can anyone recommend a temporary solution as far as make and model preferably a steel wheel that I can use until I’m ready to buy the wheel and tire combination at the end of the project? Thanks again for all the help out there.
    • Jeff G 78
      280z Disc brake conversion

      By Jeff G 78 · Posted

      There are several reasons to use the S197 rear brakes.  The rotors are larger diameter than the SVO rotors and they are vented.  The calipers have larger pistons to give them more power.  The big beef with the Maxima rears is that they don't offer as much stopping power as the stock drums.  The S197 rears allow the addition of an adjustable proportioning valve.  The Maxima rears cannot utilize an adjustable prop since the prop needs to be all the way open to get close to enough rear bias. 
    • the_tool_man
      280z Disc brake conversion

      By the_tool_man · Posted

      Any particular reason to use S197 Mustang 5-lug brakes?  The Fox body SVO Mustangs had rear discs with 4-lug.  It's a popular swap to use SVO or T-bird Turbo Coupe rear brakes to retrofit discs to other Fox body Mustangs.  These parts are still pretty common (probably available as a kit).  Might be worth checking to see if they'll fit.
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.