All Activity

What kind of problems?

Well in Panama we have 91 and 95 octane ethanol free gasoline. My car has the original manifold. I only have heatshield installed under the carbs. Maybe its time to consider ceramic coated headers. Thanks for your advice.

$25,500 For instance, Less fees. Not a chance IMHO. Sell it privately to someone that’s going to preserve it.

All I know about the 60amp internal regulator is I also have it. I think this old thread shows the wiring diagram that is implemented with Dave Irwin's upgrade. 240z alternator upgrade (instructions w/ pictures) - Electrical - Classic Zcar Community

Where did you take the alternator to be tested? If you don’t have someone at a parts store that’s competent on testing you might want to go to a local Napa store or an establishment that has a machine shop. Counter people look at a screen and most don’t have experience on working on vehicles. My HO. Ok I vented. Wish luck friend.

I would think BaT with a healthy reserve. I wouldn't consider a no reserve auction, too easy to lose it cheap.

Now I have no idea what the test read, as it only comes back with a big green check. No voltage out put was displayed. According to the 72 Z wiring diagram the red/white wire runs back to the fusebox, so that seems like it should be supplying the car with power after the car starts. My problem is that the wiring diagram shows the voltage regulator and I am running an internally regulated alternator. So I have to figure our which wire it is that should be charging my battery and which is supplying the car with power (me thinks red'white)

The alternator tested a big green check at the parts store. However, I tried to test to find any out put from the T connector while the alternator was running well I got nothing, but it would see that it fried my volt meter LOL LOL. I am sure I should have measured the red/white wire from the back of the alternator instead. But now I have to get a fuse for my voltmeter or a brand new voltmeter... which would not be horrible.

https://bringatrailer.com/listing/1972-datsun-240z-358/

I did but to no avail. I even ended up blasting the old grease/dirt out with brake cleaner and then relubing it with sprayable silicone lubricant but the squeak didn't go away

I'm wondering the age window myself. How much longer will people be interested in a 1972 Datsun?

The alternator test at the parts store?

By chance did you try a cleaner and spray able grease before you removed it. Trying to understand the process you went with.

Okay update All fuses are okay. One of the female spades in the "T" connector has 12.7 volts with the key off. The key in the Run position reads 11.8V but that also powering a electric fuel pump, so that is fine

I converted to electric fuel pump in my '71 Z and left the return fuel line in place. I figure this helps keep the fuel cooler because the heated fuel that doesn't get used in the carbs is returned to the tank which is cooler than the engine bay. I figure this allows more cool fuel from the tank to flow to the carbs. Also if it's available in Panama you should run ethanol free gas. The ethanol free I use is 88 octane and the car runs just fine. If you don't have ethanol free you should probably run premium. I do have ceramic coated headers and the heat shield under the carbs and I've seen my temp gauge get up to close to half way between the middle of the gauge and the hot side and didn't vapor lock. The weather here runs in the 90's (Fahrenheit) to 100 in the summer. As you've experienced, heavy traffic with lots of idling will heat these cars up!

Zedy…..Glad to see you still wearing your steel toed safety socks!!!!

Namerow, You are probably right. Ive spent so much money in parts and mechanics in Panama. Luckily, after 11 years of having purchased this car, this is the first mechanic who got all 6 spark plugs tanned correctly due to PCV valve not working correctly. I still have my theory of vapor lock and will remove the a/c condenser and fan i previously installed for the AC in my car. Do you think i need to leave the gas return line open for the car work better. (Airtex 8012S electric fuel pump)

Worry not my good man, your words of advice will not go unheeded. I will check out those parts this evening when I get home. A simple Alternator test is just one more part of the equation. It is simple and free.

I have seen the diode fail open in that design before. That would keep the car from charging. Also, if the ignition fuse in the fuse box is blown, it won't charge. The test I asked @Zedyone_kenobi to perform would help to identify those problems.

I am currently running the MSA 60 amp alternator kit. It was purchased back in 2010. All my tests were at the battery. After I get the alternator tested, I will run the tests SteveJ mentioned. If the alternator comes back bad, then issue solved.

I'm sad just reading this. What a beautiful car! I'm certainly no expert, but it looks like a car that would do well on BAT to me.

Gents, Looks like I might have to put up my Z for sale and I'm curious to know if there's a good market for the early-series Z cars right now. Mine is a 1971 model with parts from 1970 and 1971. Most of you know the history of my car but in a nutshell it was completely sandblasted and restored from the frame. Serial numbers do not match as the original owner let the car freeze while it was in storage. I've had the car since I was in high school (a looooong time ago). I bought it from the father of the original owner, Bob Gilder (pro golfer). Bob used the car when he was just getting started as a newlywed in the PGA. He used to drive the car to tournaments and I might be able to dig out a few photos of him pulling clubs out of the back of the car. Car was originally silver. Engine is a balanced/blueprinted L28 from Rebello and the carbs are triple Mikuni's with separate air cleaners. This was the first engine to have the triple weber setup from Steve at Ztherapy. Unfortunately it does not have the triple SU's as Steve kept those for his own projects. Suspension is adjustable Tokico's and matching springs. Pretty much everything else is stock except for the color of course. It does have sway bars installed. Dash is a new one from Les Cannaday when he was building the early reproductions that Nissan put together. Wheels are VTO classic 8's wrapped with tires that are only a few years old. Right now she's sitting covered in a storage unit and I just don't have the space to keep her at home. Windshield is the last remaining unit that we found in Nissan's inventory. All other glass is original, including the hatch with vertical defrosters (a 1970 model leftover when it was assembled). I have a Nismo fuel pump and bracket that has not yet been installed. Plenty of books, manuals, microfiche, and extra goodies will come with the deal. Not many things wrong, but there are a few glitches. The brake fluid distribution valve could use a rebuild. Some brake fluid dripped onto the rail under the distribution valve caused the paint to peel a bit. The MSA 6-1 headers get very hot and it affects the braking, I would think new owner should have the headers removed and coated or covered to prevent this (or use a higher temp brake fluid). There is a small paint bubble near the fuel filler that I have not yet looked into. Headlight cones were painted after the main car was done so the paint color is slightly different (body guy wasn't able to match the color exactly). Cold starts after sitting for months can sometimes take a few times, but she starts and drives without issue. Engine sounds great and does not leak any oil. Entire car is pristine and needs more daily attention than I've been giving her... I would consider her a stock resto-mod. Feel free to reach out if you have any questions or just comment here. Not sure if it would pull more value with a direct sale or if I should even consider putting her up on BAT. Thanks guys! Mike

So this is not the factory setup for a 71? Does it have Dave Irwin's internal regulator modification?

The problem is that I don't see the results of the tests I suggested you do.

I'd start with a new battery and retest. I suspect the alternator or voltage regulator is bad, too. It may be as simple as overworking the alt. while trying to charge a battery that won't take a charge.