Interior
Discussions about the interior components of your early Zcar.
2,371 topics in this forum
-
- 8 replies
- 4.6k views
I am thinking about replacing my stock restored seats in my '78 280z for the Cobra Clubman. I was wondering if anyone here has them and if so, can you give some feedback? After restoring my stock seats with new foam and new upholstery, I haven't been satisfied with the lack of support and comfort. Any feedback or opinions would be appreciated. Thanks. Andre
Last reply by z_scout, -
-
- 6 replies
- 1.6k views
Ok ..So i stripped out the interior .. Anyone have any suggestions on what to do?... I could use some helpful hints and opinions..Thanks:stupid: <a href="http://s152.photobucket.com/albums/s194/surfsupz/?action=view¤t=015.jpg" target="_blank"><img src="http://i152.photobucket.com/albums/s194/surfsupz/015.jpg" border="0" alt="Photobucket"></a> Thanks..
Last reply by WingZr0, -
- 4 replies
- 1.6k views
I have recovered the seats in my 1972 240z and am not sure which side is which. Does the release lever on the seat bottom of the drivers seat go on the door side or on the tunnel side of the seat? Another question, on the seat backs I noticed that where the bracket bolts screw into the seat back frame , on one side the frame is flat and on the other side the threaded nut is raised. Which side does the raised threaded part face for the drivers side, on the door side or the tunnel side? Thanks Bob M
Last reply by bob m, -
- 4 replies
- 1.7k views
History: Choke light and choke both worked. Then choke light worked and choke didn't. Adjusted the cables, choke worked, didn't notice the choke light. Now choke works and choke light is always on. If I push the choke lever all the way forward the light goes out, but then it returns to it's original position and light goes back on. I figured the cable was too tight so I loosened the clamps and pulled the lever back a bit thinking it would self adjust. But it didn't. Pulled the lever all the way back with loose clamps then all the way forward and still nothing. Gave up. Cable position doesn't seem to have any effect on the choke light. It's always on. Choke will …
Last reply by cunniwj, -
Well, I finally have a week off from work and some time to work on the '77 I bought back in September. I had gutted the interior and have all the parts to put it back together, most coming in the past week. I figured I would do it right and do the POR 15 treatment on the interior and use Dynamat before laying in the new carpet. That required removal of the nasty stock sound deadener. The good.... I used the dry ice method I found here and my sincere thanks go out to whomever figured this out because it worked fantastic. I got about 10 lbs of it from my work yesterday and laid it in. Came back 5 minutes later with a hammer and small chisel and just tapped it and the p…
Last reply by CNIXZGO, -
- 0 replies
- 1.5k views
Has anyone installed the Automatic door lock mechanizm from MotorSport? I purchased the easy install unit....and it might have been, if I would be able to find the room for the actuator,being able to place the door panel back in. There is a hole in the interior door that kinda has room to install the actuator, but the door panel will not fit back in place. If anyone has purchased this unit and had success with it ... please give me some pointers. The reason I went with automatic is because my key locks do not work and I figured oh well, if I'm gonna spend the money why not automatic.
Last reply by EdMo, -
- 4 replies
- 1.3k views
I've got this spare right side door panel in our garage that I'm planning to put up on Ebay and see what happens because I have no use for it as it doesn't line up or fit my car. It measures 3ft' across and 20.5" down. I was wondering by chance if you guys knew what year(s) and what models (2+2 maybe) this fits as it's obviously not for a '76 280z. Thanks guys, I appreciate it!
Last reply by 76Datsun280z, -
- 6 replies
- 1.6k views
Below are pics of my door panel and my center console. My console doesn't have a lid or hinged top to it. Is it supposed to have one or is the way I pulled it out of the car correct? Also, my white door panel has a blue paint on the chrome trim strip at the top. Portions of the blue are worn off, so I don't know if it's supposed to be chrome and someone painted it blue or if it's supposed to be blue. I'm not shooting for a concours restoration that is exactly correct, however I would like to keep it as original as it makes sense. Of course usability and cost concerns will also drive how the car is restored. I appreciate your help!!
Last reply by EScanlon, -
- 0 replies
- 1.2k views
I purchased this nice looking steering wheel from MSA (http://www.thezstore.com/page/TZS/PROD/SWM/50-3134) - problem is that the horn button is recessed 1" or so down into the wheel. I can't find any pics of the wheel actually installed to see if that is normal (it looks stupid) or if my mechanic has missed a step with installing it onto my '73 240Z? He followed the instructions that came with the wheel...
Last reply by sdaughtry, -
- 12 replies
- 4.4k views
Subject = 1972 240Z Yesterday, my steering wheel--the factory-installed "mahogany" wheel--began slipping on the steering shaft. Upon pulling the steering wheel, I was greeted by a pile of gray dust. Evidently, the steering wheel nut had been working loose for some time now and this "looseness" has caused a grinding down of the groves inside the steering wheel. Except for the top 1/8", the grooves are pretty well worn smooth. The teeth on the steering shaft are in good shape, however. At first glance, it appears that the damaged part is not replaceable/removable from the steering wheel. Therefore, I have: -wirebrushed all the loose dust from what's left of the groves …
Last reply by DeesZ, -
- 7 replies
- 2.2k views
I recently won these RED side panels on EBay, however my 71's interior is Butterscotch.....so I grapped a Preval sprayer and some color matched paint and.....poof...new panels. This project turned out better than I expected so I'm going to tackle the plastic panels so everything looks new. I'll throw up some more photos as the project rolls along.
Last reply by mally002, -
Dash Cap Woes!!! 1 2
by TBK1- 14 replies
- 3.2k views
just got a Dash CRAP from blackdragon and went to fit AARRRGGGHHH!! everything went up well except for both the left and right side, the ball vents opening is like WAY off on both sides as is the dimmer swithch and trip reset openings (switch opening only 1/2 inch off) but vent MAJOR off. Guess I try the sun heat thing (if it every comes out again, or maybe my heat gun!!! Sorry just venting, tryiing to put this zappp back together before the winshield guys get here in a week or so !
Last reply by WingZr0,
-
Recently Browsing 0 members
- No registered users viewing this page.
