Interior
Discussions about the interior components of your early Zcar.
2,368 topics in this forum
-
- 6 replies
- 1.3k views
The kids car is almost together, I think he has even opened up his own Classic Zcar account and will be posting pictures shortly! I am still however looking for a couple things for the interior of his 72 240z. I need to find a auto shifter handel. We were looking at after market shifter knobs but none of them will fit...the shifter is too thick. We also need to find a rear speaker bracket. We have one but the other one was made out of wood paneling! If anyone has these parts please PM me or shoot me an email at guzinski@comcast.net. Thanks all!
Last reply by =Enigma=, -
-
- 5 replies
- 1.4k views
Ive got a 71' 240 Z and i got both the lap and the shoulder straps but i cant figure out how they connect i dont know if im missing something or just dont get how they connect if anybody knows what im doing wrong plz help if you have pics they would be great thanks.
Last reply by 26th-Z, -
- 8 replies
- 2k views
Today I went ahead and removed both car seats, and proceeded to remove the passenger compartment carpet. Rust is very minimal underneath the carpet (good news); although I was surprised to find a few of the rubber seals unplugged. Removed all carpet and under-material (not sure what its called...) I am planning on buying a carpet kit and redoing the interior, although I was curious if buying the cut and molded carpet comes with the premade cuts for such areas as the seatbelt buckles, center console clips for the e-brake; and then additional prepared area for the seat buckle mechanism itself. I am just looking to make the carpet installation pretty hassle free, and i wan…
Last reply by Poindexter, -
- 5 replies
- 1.5k views
Hi everyone, The interior on my car is black but notice a few place where the black is peeling. The original color was blue and still seem to be in very good shape. So would like to remove the black paint on the trim (which have been change color very well) without damaging the original blue color? Anybody can give me a hint on this? Thanks in advance, Joce
Last reply by Walter Moore, -
- 4 replies
- 2.3k views
It has been quite a while since I took my ventilation system apart, and now I can't remember how the center vent/hose attaches to the back of the vent controls :knockedou ! I know it matches up size wise (see pic below), but I must be missing something that secures it to the back of the control unit! I appreciate the assistance!!
Last reply by Duffman, -
- 3 replies
- 6.4k views
Has anyone replaced the driver's side window regulator? One of the things wrong with my car, is that the window regulator needs to be replaced. The window will crank down, but then getting back up is impossible without moving the actual glass physically. I suspect I will need to remove the door panel then replace some parts; are these parts (regulator) hard to come by? Special Order? Thanks!
Last reply by mikewags, -
- 4 replies
- 1.5k views
Hi guys! Thought I'd share a tip I came up with today. When I dyed the magnolia seats in my XJ6, I used an expensive water based acrylic latex colorant that I special ordered fom a place on-line. I went through quite a number of bottles of the stuff at $20.00 each, but it came out looking super nice and very original, so I was OK with the expense. I got to thinking that the stuff was pretty much the same as the stuff they sell at the craft shop in the little $1.00 bottles. So I went down to the Benjamin Franklin store and bought several different shades of maroony red "Americana" paint in the 2oz bottles. I did a color matching test using a never installed red Nissan se…
Last reply by mikewags, -
- 0 replies
- 1.2k views
Has anybody had success with any of those "systems" that ar supposed to repair stone chips, sctratches, etc.? I have a few spots where the paint just peeled/flaked off ( probably wasn't properly sanded before painting) and a few chips, and could use repair. thxZ
Last reply by TomoHawk, -
- 7 replies
- 2.5k views
As I gutted my project 76 280, about 90% of the sound deadener/ heat shielding came off the floorboards (NO RUST!! YAY!!!!!), tranny tunnel and deck. Anyone know of a decent replacement material available? This stuff looks like truck bed Rhino lining without the grit. I was thinking of just adhereing some heavyweight rubberized sheet to the steel and covering that with insulating foam under the carpet.....
Last reply by Walt76280Z, -
- 15 replies
- 2.8k views
Hi Guy's I've been searching through the old post looking to see if there is a preferred method to care for the original dash in my Z. The one thing that I have been able to come away with from previous post is that I should stay away from applying Armor-All to the dash unless I wish to continue applying it on a regular bases. I know the car has always been garaged since the first owner. Since I've had the car anytime it's been left outside in the sun for an extended period of time, I've always put a windshield sun shade in place (I'm the 4th owner). The dash is showing signs of age, with the black stating to fade (no cracks yet).. I've been thinking about just applying a…
Last reply by Carl Beck, -
- 0 replies
- 1.3k views
Can anyone show or tell me the proper way to install the "A" pillar and windshield interior vinyl??? I want to ensure I do it right the first time. Thanks for any info. / photo's / etc.... Todnikmad
Last reply by Todnikmad, -
- 15 replies
- 2.2k views
This drivers side door-jam area trim piece i need to get replaced. Basically it is on the bottom of the door jam; between the carpet and the metal plate/rubber seal (in the door jam) --- It has interior material on it, although metal underneath. I'm curious what this trim is called. The piece I currently have was rusted out so I removed it. Any idea where I can get it replaced? I can post a photo of the actual trim later on, although i think you guys get the point... Thanks!
Last reply by trykflyr,
-
Recently Browsing 0 members
- No registered users viewing this page.
inline6
