Interior
Discussions about the interior components of your early Zcar.
2,368 topics in this forum
-
- 6 replies
- 2k views
I ordered the B-Quiet Ultimate to line my floors and doors. My carpet came today, however the B-Quiet won't be here until next week. Once I install the B-Quiet do I just lay the carpet over it, or tach it down. Also does there need to be a barrier between the carpet and the B-Quiet? Any hints or tips would be appreaciated. Thanks, Randy
Last reply by a7dz, -
-
- 10 replies
- 2.1k views
Hi guys. I'm at the point in my restoration where I want to replace the (original) heater hoses with some new OEM hoses. I have the molded hoses from Nissan all ready to go on. I was looking at where the hoses come into the passenger compartment last night, and I'm wondering if there's enough room to get my hands up in there to the heater valve without removing the heater blower housing and motor, or if I'm going to have to start disassembling stuff under there.... If it does have to come out, what's involved? Just the four bolts to the firewall and the control cable, or is it more involved than that? I have a FSM and I should look at it, I know, but I'm at work and it's …
Last reply by rtaylor, -
- 9 replies
- 2.9k views
Dash pocket? Okay, what is this? Was it to replace the radio if you don't want one or didn't get that option? Maybe I'm missing something. Not a glove box I don't think. Here's the listing: http://cgi.ebay.com/ebaymotors/70-71-EARLY-240Z-CENTER-FACE-DASH-POCKET-NEW_W0QQcmdZViewItemQQcategoryZ40017QQihZ018QQitemZ280055247644QQrdZ1
Last reply by sblake01, -
- 3 replies
- 1.8k views
I just bought a 78 280z 2+2 locally for $1300. The interior is in pretty good shape. The chrome and woodgrain trim on the door panels have lost their chrome, and I was wondering if anyone knows where I could get a set of trim for them, if they are even available? Any help would be appreciated. THANKS
Last reply by CANDYBLUE2+2, -
- 2 replies
- 1.4k views
Hey guys, I have a guy looking for seats...since I have 2 sets I was looking to help him out...but I have know idea how much would be a fair price...he's only looking for one, but I'd prefer to sell as set..they are both in good shape, one or two small tears, but all in all decent..I don't want to make big money just fair to me and him....any help would be great. thanks Dan
Last reply by Cethern, -
Got a radio! 1 2
by Arne- 22 replies
- 8.1k views
OK, maybe no one else will get excited about this, but I'm pretty stoked. I got a radio today for my early '71 240Z. Since my goal for the car is not completely stock, but period correct (I want it to look like a typical mildly-modified 240Z as they were driven in the mid-70s), I decided a while back that a factory AM radio wasn't quite what I wanted. After all, large numbers of those AM radios got yanked and replaced by aftermarket AM/FM/cassette decks. So that was what I decided I wanted to find - a vintage shaft-type AM/FM/cassette deck, even though I no longer own any cassettes. Well, I found it, and it's near perfect. It's a Pioneer KP-8000 Supertuner dating from 19…
Last reply by cplus, -
- 32 replies
- 5.7k views
Hi, does anyone know where these rear strut top speaker enclosures are available? Rob
Last reply by RP975, -
- 3 replies
- 3k views
OOOPS, sorry I put this in the wrong forum when I submitted it the 1st time. Anyway I sent my 76 280Z steering wheel to american stitches and they repainted my old wheel put on new padding which I requested to be thicker than the old, put on new leather and it turned out great.Turnaround time was about 2 weeks and the cost was $ 250.00. The reason I had it done because all the new wheels were a smaller diameter and for a tall person they block the view of the speedo and tach.
Last reply by jmark, -
- 0 replies
- 1.1k views
On a 78 280Z- Does anybody have some good pictures of the way the vinyl and carpeting are applied to the floor & sides on a 280Z? I have the seats & front carpet out, and I'm going to see if I can do the carpets right this time: PO had the carpet wall-to-wall, and stuffed under the scuff plates. Also, it might help to have a pic of how the carpet lays under the seats. Mine were cut and just laid in between the seat rails. thx
Last reply by TomoHawk, -
- 2 replies
- 1.7k views
Is there more than one antenna switch location for a 71 240Z? Mine has the switch located above the heater box, but in my search for a nice radio, I've run across some that apparently have the switch to the right of the station knob, and others with the switch over the station knob like the later cars? How do you tell which one is correct? John
Last reply by Arne, -
- 3 replies
- 2.4k views
Who has their heater panel out of the car? I'm getting ready to put the heater control back in the yellow car, but I'm missing one control cable. I plan to make a new one out of an old choke cable, but I need to know the length. The one I need is the one with the loop end that goes to the big flap in the heater box. How long is the cable itself, and how long is the sheath? Can anyone help?
Last reply by Arne, -
- 8 replies
- 5.4k views
I wish I could keep my original wheel as-is, but I just don't enjoy steering with that thin wheel. Spoiled by various (thick) Momos and newer OEM wheels. Someplace, maybe Too Intense, lists a leather wrap that they say is somehow custom for the Z wheel. Is anybody using it? What about after-market wood wheels? There are some terrific-looking Nardi wheels available (thicker). But the spokes don't have the receding, dished shape found on the Z wheel. So I wonder if it would end up too far from the driver? Or maybe the hub for those wheels is deeper. Thanks for any ideas, Steve 1973 240Z
Last reply by Pop's Z,
-
Recently Browsing 0 members
- No registered users viewing this page.
slogan5
