Interior
Discussions about the interior components of your early Zcar.
2,368 topics in this forum
-
- 5 replies
- 1.4k views
please i need a tip where i can buy good and original looking seatcovers ,seat foarm and a carpet,for my 1971 240Z. Thanks all,and sorry for my bad english
Last reply by abas, -
-
- 6 replies
- 1.8k views
Okay, another small question. This is the mod my PO made: Best I can tell, he cut some material from the end (dash side) of the Fuse cover panel. It also appears that he trimmed part of the center console in order to get the EQ (kids, remember them?) unit to fit. I'd like to dump the EQ unit (sounds like junk and is a wiring mess), but what I dont know is this: (1973) Did the original cover go all the way up to the dash (ie, under the radio bottom lip)? How was this cover secured? Hinged? Clipped? If it was secured or did not go all the way to the dash I'll forget trying to locate a replacement panel and concentrate on making up a panel insert, maybe strick a switch …
Last reply by Ricklandia, -
- 3 replies
- 1.5k views
I put up a thread recently about using 280 seat mount rails in a 240. SO i was told i can, but i was wondering if i have to reposition the main seat bracket. im trying to avoid re-welding that piece because i can replace the floor panels without moving that piece. If i do have to reposition that piece, does anyone know where i can get new seat mount rails for a '71 240Z? thanks
Last reply by hls30.com, -
- 4 replies
- 1.6k views
Will a 72 240Z Door panel work on a 73 240Z ? What are the differences is any on the 71 71 and 73 door panels? Thanks Nelson
Last reply by bob m, -
- 18 replies
- 2.8k views
Has anyone managed to install central locking into a 1970-78 Zed? I had a good go over the weekend and just couldnt get the angel right, I positioned the Central Locking Actuator above the lock and mounted it off the door handle nuts, But the actuator was to far down and the angel is all wrong for the lock to open and close properly, if i locate it any highy it gets pushed out by the cotours of the door, Any suggestions...........anybody got pics of how they mounted their central locking??? pics of the brackets they used???
Last reply by Aussie260z, -
- 5 replies
- 1.7k views
I am in the process of buying almost everything for my interior. All of the plastic panels, all vinyl, and the seats. My interior color is originally red and I intend to keep it that way. My choices for vendors are Motorsport, Classicdatsun.com, and Western-z.com. Can anyone recommend a source or help me choose one of these vendors based on experience? My concerns are color matching, "original look", and price. Thanks Saro Fagerian
Last reply by TTDRIVER, -
- 26 replies
- 4.7k views
i want to get a new head unit in my 72 240z but i can't find mounts or even info on if something modern would fit. any advice would be greatly approciated
Last reply by Ricklandia, -
- 4 replies
- 1.4k views
Where do I go for the headliner and front windshield post vinyl? I know that they have the kits but where do I buy blue vinyl. I need about 4 yards of this stuff to cut out my headliner and post covers.
Last reply by ZSaint, -
- 6 replies
- 2.1k views
Well I was at my local Auto Zone and a black leather shift boot with red stitching caught my eye. I already have the center console and all out to install my aftermarket stereo, so I figure what the heck. So I take the stock shift boot off without bothering to see how it was connected. Now I have 4 little metal clips and no idea how to fit the new shift boot back on. Can anyone help me? Dave
Last reply by Bambikiller240, -
- 7 replies
- 1.7k views
The seat belts in my '71 240z are shot. Push botton latches permenantly fussed and belt material is faded and cut short. What would be ideal (according to what I've read) would be a retractable set from a 260 or 280 2+2. (no pockets for standard retractable) Problem is, I can't seem to find anything anywhere. Zedd Findings has had no luck and I haven't even gotten responces from others I've emailed. MSA has only racing belts and British Victoria only has a plain lap belt that wouldn't work with my sholder belt (even if it were reworked). Anyone know a source or someone who can repair?
Last reply by johncdeere, -
- 11 replies
- 8.5k views
Today I installed a Momo steering wheel which came with a horn button. My problem is that the horn will not work. The adapter has a separate steel like rim that has a provision for the ground and the so called horn button is just a plastic piece that snaps into the center hole. To me, there does not appear to be any movement in the horn button itself and once installed it does not depress and seems pretty solid. I haven't a clue how this system might work since there is no movement in the cover and no metal to metal contact that I can tell. Does anyone know if this may be just a cover and not really a horn button? Or, do I have to make any other connections to get t…
Last reply by ZSaint, -
- 10 replies
- 15.4k views
Hey fellas, **Non-sufficient point gap- **Too close to engine heat ** I am running a Mallory Dual Pt. Distributor from motorsport on an L28 in my 240Z. (P.S. I wouldn't let go of my old engine. It's in my garage on a palet, and completely wrapped in shrink wrap). No way I,m giving up that L24 block for a measley, very measley core charge. I also added an MSD Blaster coil with balast. The dist. came with a condenser that failed me not long after I upgraded my alternator. Don't think the alt. is at fault as it is a ZX alt./internally regulated. The car does not show any other classic signs of an overly hot alternator. Bulbs, fuses, wiring all seem great Seems like th…
Last reply by 72' 240,
-
Recently Browsing 0 members
- No registered users viewing this page.
