Interior
Discussions about the interior components of your early Zcar.
2,368 topics in this forum
-
- 5 replies
- 1.5k views
Gents, I am working to buy a '73 240 from out of my area (another state), and the owner sent me a video as he drove the car. I noticed that on there was a red indicator light on the speedometer just under the the odometer. Can someone please tell me what this light "indicates"? The light did not got out immediately after engine start, but did go out after about 30 sec of driving. Since the Z's have an oil pressure guage (correct?) I don't think it's that. Can someone clue me in? So far, I think I'm getting a rather sweet deal on this car so I don't want to wizz off the seller with too many nagging questions. :tapemouth Many thanks in advance!
Last reply by Ricklandia, -
-
dash rip rock 1 2
by zhead240- 16 replies
- 2.5k views
what's everyone's opinion on this dash? http://www.zcar.com/forums/read.php?f=4&i=210784&t=210784 like or dislike?
Last reply by Ricklandia, -
Tonneau Cover 1 2
by texasz- 20 replies
- 4.4k views
My new (to me) tanou cover! These things are darn near impossible to find...I've been watching for one for quite some time now and have only ever seen two for sale (not counting the one a fellow member sold late last year). http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4526378560&rd=1&sspagename=STRK%3AMEWA%3AIT I can't wait until it arrives! I love these kinds of rare parts. Now all I need are a good set of installation instructions...DJACEY??? I know you got one late last year from a guy in the US and it included a clean set of installation instructions...would you mind making a copy and emailing them to me? Or anyone else who happe…
Last reply by texasz, -
- 2 replies
- 1.8k views
Am getting ready to put my Momo steering wheel on and was wondering if I should go with just a Momo hub adapter or use a quick release hub. Have read what I was able to find in previous posts. Anyone have any long-term experience with a quick release? Does it get loose after many take-offs and put-backs? There’s one on Ebay (picture below-# 7960519634) for $79.00…. any comments about how good this might be? George
Last reply by ZIII, -
- 0 replies
- 1.1k views
prefer around Los Angeles area.
Last reply by dualies, -
- 14 replies
- 2.4k views
so i finally got suspension: koni adjustables w/ ground controls. i need a dash but i can't find anything anywhere. theyre all dash caps/covers and whats the point if i dont even have a dash!!!! i'm looking for a decent used dash for a '71 240z, couple cracks are fine just no earthquake sizes. i live in the LA area pretty close to Glendale, CA. if anyone can provide some resources or advice i'd really appreciate it. thanks
Last reply by deedee, -
- 3 replies
- 2.6k views
I bought some FTO seats quite a while back complete with rails and everything to fit into my 260z. I only just finished fitting the first one the other day. It was quite a lot of work (not for me, my dad did just about all of it) but the results are great, they are soooo much better than the standard items. We had to do away with the orignial FTO rails altogether as they are just far too wide, build a new frame for the seats and also attach the seat back to the frame (the back is normally attached to the rails, not the seat bottom). As they are now they only _just_ fit, as they are very wide up top, and wide down the bottom. Have done away with the standard seatbelt guide…
Last reply by Cuong Nguyen, -
- 13 replies
- 6.6k views
Ok, a little background info. I have an 85 300zx at the moment. The only thing good about the car, other than the T-Tops is my system.(Its worth more than I payed for the car heh) I was just wondering what the speaker set up was for the 240z because Im going to sell my 300 and get a nice rebuilt 72'. My 300 currently has 6.5's all the way around. And I just bought them all recently. But not recent enough to take them back So I was hoping I'd be able to get them in the 240z. Possible? I can't find anything on the speakers of a 240z. All the fit guides I have looked at either don't go back that far or don't have nissan/datsun. Any help is good. If they don't fit, advic…
Last reply by z3r0, -
- 9 replies
- 2.3k views
My Z has an AC in it and I don't think I will use it, I think it worked but I think it just got unhooked bc it is a hp robbing son of a gun. does anyone know how much I should sell it for?? Thanks
Last reply by cremmenga, -
- 2 replies
- 1.3k views
i'm trying to find some non retractable shoulder harness seatbelts for my '71 240. the few i've seen in the local junkyard are worthless. are there any aftermarket belts out there that aren't too expensive as i will be replacing them later when i install a racing seat. how about something i can use in conjunction with my existing lap belts. they are in great shape. thanks for the help.
Last reply by cremmenga, -
- 8 replies
- 3.6k views
Any one ever made aluminum door panels for there z? I noticed that a 1969 Ferrari Daytana Race car had aluminum door panels and I started thinking that it could be interesting to do to my 260z. You could make the panel by tracing the original door panel and also us it for the template for the correct placement of holes for the window crank etc.
Last reply by TomoHawk, -
- 4 replies
- 1.8k views
Well, I have had this problem since I purchased my 280Z back in November, and I am finally getting a chance to pull the dash and check out the wiring for my three right hand gauges.... See.. the gauges work fine... but the lights like to come on and off frequently... its rather odd and doesn't help at all at night... What I really want to know of is just anything I should look for when I pull the dash... any specific wires or what have you that could be causing my problems... thanks a ton everyone! -ZZZap
Last reply by sonofzzzap,
-
Recently Browsing 0 members
- No registered users viewing this page.
