Interior
Discussions about the interior components of your early Zcar.
2,368 topics in this forum
-
- 7 replies
- 2.6k views
The previous owner of my 280z removed a few of the interior pieces, and i cant find the screws used to put them back. The removed pieces include : steering column plastics, passenger and driver side plastics at the bottom of the dash, center console, dash filler near the windshield, and the driver side door rest/handle. Does anyone know where i could find these fasteners?
Last reply by FastWoman, -
-
- 2 replies
- 1.3k views
I've got a 1971 240-Z that has a brand new speedo cable installed but I am getting an up/down jumping of the needle at almost any speed. The jump is about 5-8 mph so it's difficult to know how fast you are actually going, plus it's irritating. Is this an electrical or a mechanical issue? Is there a quick fix for it short of a speed rebuild? I also have a speedo issue on my 1972 240-Z. The regular odometer records mileage accurately but the trip odometer gets stuck and actually stops recording mileage after a while after I zero it out. The point at which it stops working seems to change with each tank of gas, not a particular number. I'm guessing it may be a lubrication o…
Last reply by EScanlon, -
- 1 reply
- 2.5k views
I removed the 3 screws behind the choke lever......my 73 has 2 screws below the radio that attach to the side of the tunnel....the 71 doesn't have these screws. What else is holding the console on the 71? It won't come off. Thanks. Guy
Last reply by Diseazd, -
- 24 replies
- 16.9k views
Hey Guys, Take a look at the photos in the link below. I think that somehow I screwed up in the process of doing the interior. I purchased the 5 piece carpet kit from the Zstore and the vinyl kit from blackdragon. The carpets are just floor mats. There are nothing under the seat. I have the black sill plate that are to hold down carpet. What carpet? the carpet does not reach up to the door sill. I want to use it. an also the chrome datsun logo kick plate. Pls tell me what went wrong here. I am thinking that I should of bought some other carpet pieces. I need to insulates more areas I think. Please help. Anyway i have about maybe a month to finish this car. http://s347.ph…
Last reply by socal70Z, -
- 8 replies
- 7k views
My '72 emergency brake handle was pretty beat up. I looked around a bit at buying a new one and then decided to try and fix my old one. The first picture is a severely cropped shot of the interior showing the brake handle before any work. The second picture shows the brake handle when I was done. The process was fairly simple: Sand out all the bad stuff with 100 grit, than 220. Then smooth it further using ScothBrite (burgandy grade grit) finally polishing it with my polish wheel on my bench grinder. It's hard to get a good picture of a shiny black object, but I'm pretty pleased with the result.
Last reply by TomoHawk, -
- 0 replies
- 1.6k views
I'm looking for photos of the MSA 280z interior, my car is a 76.
Last reply by robftw, -
- 5 replies
- 2.7k views
My Z has annoying habit of squeaking. Firstly i tought that the sound comes from pedals but soon i realised it came from the steering wheel. It does not squeak when turned BUT when driving over small bumps etc. I tested it and it makes the sound only when lifting it up or pushing the wheel down. It's very loud noise and i need to get rid of it. I cant locate the excact place where it comes, maybe you guys can help? :stupid:
Last reply by Pop's Z, -
- 4 replies
- 2.1k views
I've dyed all of the plastic in my interior with SEM color coat, the stuff works absolutely fantastic. My problem now is that the two brackets that hold the back rest to the seat need to be repainted. I have the off white interior, and getting a nice match of off white spray paint to refinish the brackets hasn't been easy. I'm wondering if the SEM color coat would stick well to metal ? I have all new vinyl for the seat upholstery as well, and the SEM is very close. I'm tempted to give it a shot and was wondering if anyone else had any success with this ?
Last reply by cozye, -
seat frame?
by pjoe- 5 replies
- 1.8k views
Is the seat seat frame the same on a 240z and 280z? Mine is rusted pretty bad and before I try to weld it I figured I might be able to find a better used one. Brian
Last reply by pjoe, -
- 5 replies
- 2.3k views
The new vinyl is in. I still have a few bumps to rub out but I'm happy..... I put in the new rugs to see what it would look like. It was a lot of work to get the MSA kit to fit well, I had to pull and stretch and heat the material but in the end it fit OK.
Last reply by philbar73, -
- 2 replies
- 1.4k views
How in the world does one install that little retainer on the window crank? Thanks
Last reply by GIchiro, -
- 15 replies
- 9.6k views
A while back I purchased a restored 1978 280Z. The car looks great, inside and out, except for a poorly installed full face dash cap. The cap fits well, except in the area around the trip odometer reset and dimmer control knobs, where it gaps by almost ¾ inch. In fact, it fits so poorly that you can’t even install the two knobs. This has been bothering me ever since I received the car, so last week I thought I'd remove the existing cap, prep the dash properly and install a new one. I had no problem removing the old cap, as the double sided tape used to install it had long since lost its grip. The dash was in bad shape as I expected, but I really couldn’t find a…
Last reply by TomoHawk,
-
Recently Browsing 0 members
- No registered users viewing this page.
Parman
