Aftermarket
A forum dedicated to aftermarket modifications and major changes to the Z.
354 topics in this forum
-
- 4 followers
- 24 replies
- 9.5k views
Has anyone eliminated the stock metal fuel rail with a rubber one? If so any pics? My vapor locking issue is really annoying Sent from my iPhone using Classic Zcar Club mobile
Last reply by Zedyone_kenobi, -
-
- 3 followers
- 15 replies
- 1.6k views
My 79 zx has a small rust buble, about 1 1/2 inches square, over/under the top windshield trim. The windshied is cracked and scheduled to be replaced. I want to repair the rust buble while the glass is out. I suppose Bondo could do the job but is there a better product that would be as easy and better to use?
Last reply by mayolives, -
- 1 follower
- 47 replies
- 22.4k views
This is my current project - putting a VQ30 DET into a 1974 260z. zcar project This engine is from a 1999 Nissan Cedric. To put this engine in I have had to remove the exhaust which runs behind the engine and the turbo to fit the engine behind the x-member. Then I will have to have new exhaust manifolds made bringing the turbo in front of the motor. The plenum had to be removed because it was too far off the back of the engine, so a new one will have to be made towards the front of the engine. I will have to make a new x-member and modify the engine and transmission mounts. These are the dimensions: From the back of the water pipe at the back of the engine to the front …
Last reply by Patcon, -
- 3 followers
- 14 replies
- 2.2k views
https://santabarbara.craigslist.org/pts/d/santa-barbara-1974-datsun-260z-parts-car/7500420356.html Looks like a project, but decent price.
Last reply by psdenno, -
- 1 follower
- 0 replies
- 1.2k views
For my never ending project, I swapped an MSA Type 2 spoiler for a Type 1 and installed a 240 bumper. Please let me know if your interested in the Type 2 spoiler.
Last reply by RWB5, -
- 3 followers
- 5 replies
- 2.7k views
Love this front Air Dam on this 73 240z called the Beast. Cant seem to find one like it and hoped someone her may educate me. Thanks,Blaine
Last reply by Patcon, -
- 2 followers
- 3 replies
- 1.7k views
If you live in a dry climate....
Last reply by dutchzcarguy, -
2019 ZCCA Branson 1 2 3
by Randalla- 11 followers
- 27 replies
- 6.3k views
Thought I'd post just a few photos, including the dozen Scarabs in attendance, the largest gathering in history. There were never more than six cars at Scarab Engineering when they were in business. This was special as we reunited Brian Morrow with the very first Scarab he ever produced in late 1973. Brian was unaware the car still existed and after 43 years he saw it for the first time. It's owner had it for 34 of those years and kept it in outstanding condition. Scarabs took four top awards at the 2019 ZCON. I debuted the Scarab book I have been working on for well over two years, after finding and interviewing all the original players. The book is titled, "Resurrecting…
Last reply by 70 Fairlady Z, -
Z security
by AK260- 4 followers
- 9 replies
- 2.7k views
Now this is something I WILL install!! For the price of a cheap SIM (£5/ month) you have a tracker / Geo fenced car that cuts off the fuel or ignition supply with what is totally stealth!!! You can also install a loud 120db+ siren inside the car to go off when it disables / goes out of the geo fence. ￡11.50 40％ Off | GPS Tracker Motorcycle Mini Car GPS Relay MV740 9-90V Vehicle Tracker Vibrate Cut Line Alert Geo fence Alarm Free APP PK CJ740 https://a.aliexpress.com/_msdJfl3
Last reply by AK260, -
- 6 followers
- 12 replies
- 3.9k views
I ordered a decal I needed to complete the restoration of my 240Z to have it ready for a show and it never arrived. The item was sent with no tracking information so there was no way for me or Zeddsaver to track the delivery. My order was placed on June 6th. By June 16th still no delivery of my decal so I contacted Zeddsaver and asked them to resend the item since it had not arrived. instead I received a cash refund which does not help me one bit! I still need the decal to complete my restoration. Zeddsaver put this item in the mail and just assumed that it would arrive at my location. I am very dissatisfied with the level of customer support I received from Zeddsaver!! D…
Last reply by jitenshakun, -
- 1 follower
- 7 replies
- 9.1k views
Has anyone here actually installed one of these TWM big throat throttle bodies? What sort of performance gains did you observe? My general rule of thumb is you can't actually FEEL anything less than about a 10 horsepower gain... I have serious doubts, however, about a [claimed] 9% increase in rear wheel horsepower. That would require a 20-30 horsepower gain at the flywheel, and I simply don't a bolt on part bumping the Z's gross horsepower by 30%, unless you COMBINED it with headers, low-flow exhaust, and other bolt-ons. Here's the PR from the recent ad, which I ASSUME was cut & pasted from the Motorsport website... "This is a Motorsport Throttle Body for a fuel …
Last reply by conedodger, -
- 4 followers
- 14 replies
- 13k views
For anyone who has looked at or bought the Recaro LX seats from ebay seller michikogoodproduct, this information about removing the headrests could come in handy: https://passionford.com/forum/ford-escort-rs-turbo/237664-remove-headrest-from-recaro-seats.html My order took the slow boat from Thailand to save shipping costs -- about 2 1/2 months -- but they arrived today and my first impression is very good. These are used Recaros that have been re-covered. Love the factory retro look -- the material and workmanship seem good quality. Still need the Wedge brackets to complete the install, but I'm freshly motivated! https://www.ebay.com/sch/michikogoodproduct/…
Last reply by mck recaro seat car,
-
Recently Browsing 0 members
- No registered users viewing this page.
Paulytunes
