Open Chit Chat
This area is for holding open discussions.
5,989 topics in this forum
-
- 4 replies
- 1.3k views
I received the following from another member of the Society of The 173rd Airborne Brigade and thought I'd pass it on to you all. Rick. IT IS A GOOD FEELING TO KNOW THAT SOME PEOPLE TRUELY APPRECIATE THE "VETERAN". Subject: Fw: Fw: Perspective > Perspective > > > > I sat in my seat of the Boeing 767 > > waiting for everyone to hurry and stow their > > carry-ons and grab a seat so we could start what I > > was sure to be a long, uneventful flight home. With > > the huge capacity and slow moving people taking > > their time to stuff luggage far too big for the > > overhead and never paying much atte…
Last reply by Alfadog, -
-
- 14 replies
- 1.8k views
I want to sum up an argument with one of my co-workers. Their is no way to put a turbo on a carberated L28! If this is true please correct me. I think it is impossable. Brian:alien:
Last reply by 240Zdragon72, -
- 13 replies
- 3k views
I realise alot of us Aussie's will know of this car or have read this article but I think alot of other people will enjoy reading about this car. I have never met the owner but would like to one day just seen him driving on the street when I was in my 260z . It's a very nice car Enjoy. http://www.fullboost.com.au/cars/readerscars/sinisha240z.html
Last reply by PrOxLaMuS©, -
Hello everyone, I am trying to clarify how the 240 bumpers mount on a 280. I know it can be done but I am trying to make sure I buy the correct pieces before I buy them. I know noone personally with a 240 so I cannot see for myself. I think the 240 has a recessed area in the quarter panel where the bumper meets but my 280 does not have this area. How will the bumper fit? The front seems to be fairly straight forward but the rear has me hesitant to try it. Is there a difference in the 240 bumpers from year to year? I have searched the forum for any swap info but noone has ever addressed the issue of the recessed area or any specific instructions on how the install goes. I…
Last reply by ROOPZ, -
- 7 replies
- 1.7k views
Just another post about a user's Z finally hitting the road again. Took a while to get started and warmed up but it runs. Definitely needs a muffler, it sounds like a biplane. I took it for a spin around the block and the T5 swap seems to have no problems. Just curious, what's wrong with the timing when a flame comes out of one of the carbs when I rev the motor? I'll post a video of the car running around in a day or two! YAHOOOO! I have a car again!!!!!! :stupid:
Last reply by 240Zdragon72, -
- 13 replies
- 1.5k views
I had bought an N42 head from a guy and just received it last night. It has been rebuilt and then stored without having been used so it truely is a fresh rebuild. However, there was no cam sproket or valve cover and there is some rust in a few places. Please see the pix in my my gallery, there is one where I have pix from all angles in one photo and have circled some of the rust locations in red. I don't understand how the gallery system works, the head pix are scattered throughout my gallery and not in the order I uploaded them either. In short, there is a little on the cam, on the rod that runs parallel to the cam, the manifold bolts, in the little passages on t…
Last reply by Gav240z, -
- 7 replies
- 1.2k views
Here is a pic of the inside of a diff I am looking at buying and I'd like to know if it appears to be in good shape?
Last reply by texasz, -
- 11 replies
- 1.7k views
Hi Fellas, I am going to fit flat top pistons in my L28, and in order to cater for the new parts and added compression, I'll be honing the cylinders and fitting new rings. All other components within the motor are good, checked bearings for signs of scoring, wear etc and there is minimal if any wear at all. It's an N42, any other recommendations you guys think could be done, or alternatively, be good to hear feedback from experience. Cheers :classic:
Last reply by Gav240z, -
- 1 reply
- 1.3k views
Nice movie of a race between a 350Z, BMW M3, Honda S2000 en Porsche Boxter with a Nissan Skyline GT-R34 as camera car. You are going to love it! :love: http://300zx-twinturbo.com/vidz/350Z_TsukubaBattle.asf
Last reply by nutxo, -
.thumb.jpeg.f8c6445904c3de4095aba904646c3840.jpeg)
- 6 replies
- 1.4k views
I just put new upolstry on my Z's seats and thought I should replace the insulation on the floors and firewall while the seats were out. (actually, 'replace' may be the wrong word, as I was amazed at how much was just not there!!) I've been thinking about doing this for awhile and was looking at the stuff offered at MSA and Victoria British. Then I had an idea to try something different....and cheaper. I went down to Home Depot and bought a 10' roll of water heater insulation and foil tape. (about $30 Canadian at the end of the day!) The insulation is silver foil on both sides and 'bubble' in the middle. It was remarkably easy to work with. Took me about an hour to …
Last reply by Zedguy, -
- 2 replies
- 1.4k views
Just thought some of you Z-nuts may be interested in this: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3549735822&category=19061 Looks amusing, probably collectable.
Last reply by kyteler, -
- 7 replies
- 1.4k views
Can you see it? i was shocked to see this when i checked the plugs on my car i have just gotten it from another person not running cause the exsuast manifold was toast and he was switching out the flattops for some round but i coudent seem to tune the carbs in so i checked the plugs and low and behold this it what i saw...... number 6 didnt have a gap at all...... and whats with the differnt types?. yes i did replace them after this but i just thought id share
Last reply by beandip,
-
Recently Browsing 0 members
- No registered users viewing this page.
