240K Skyline
Conversations about the Nissan Kenmeri 240K & Skyline
1,173 topics in this forum
-
- 13 replies
- 3.1k views
I'm looking for a set of 240K Skyline tail lights with the metal surround panel. Any one have a clean setup that they would be willing to sell and ship to the US? Both tail lights and the surrounding panel. Bryan Dat240zg
Last reply by 240kconvertible, -
-
- 15 replies
- 3.7k views
didn't have a very good day today it all started with a quote from a guy i know to fix up the rust, straighten the body and paint the car.. the price was not pretty.. $15k!, and whilst i am sure there is a lot of work, and i am 100% certain it would be a perfect job, there is no chance i can afford that for paint! So my mate started trying to convince me that we should attempt bogging, sanding, priming etc.. on a small area and see how we go.. so i started sanding the POR to start work, and sections of POR started flaking off! It seems that the POR metal ready rust conversion hasn't worked completely.. it seems that 90% of the car may be ok, but there are some areas (…
Last reply by 240kconvertible, -
- 30 replies
- 4.5k views
well Guys, After meeting up with Brian in the US and having a chance to drive his 240k, I spent the last couple of months kicking myself for not originally going all out well.. after a quick firesale off some of the RB25DET bits and pieces that i have collected over the years, it has earned me enough money to buy my next engine.. after 5 previous engines, the original L24, RB20DET, RB30E (for use in the bottom end of an RB30DET), RB25DE (for the RB30DET head), and then the RB25DET.. i am pretty sure that this will be the last (unless i find a spanking deal on a VR38DETT .. but i am not holding my breath) i should have it in my hot little hands in a couple of weeks …
Last reply by 240kconvertible, -
- 10 replies
- 2k views
Hi, I came a across this whilst doing some googling, I though some might find it interesting http://www.restored.jp/nissan.htm Nigel
Last reply by 240kconvertible, -
My new 240K 1 2
by bonzelite- 19 replies
- 4.4k views
Here it is, finally Thanks to Brian and Kent. From an Australian paddock to San Diego, California, to Phoenix, Arizona, then driven back to Los Angeles, CA ---> this is probably the last stop for this one. It's a keeper and will be converted to GT-R appearance. It ran flawlessly for the 400 mile journey from AZ to CA, with the exception being that it blew (probably) the front seal and sprayed oil out during the journey. We stopped frequently to refill the oil (which was not too much actually considering the conditions, about 3 quarts total), and drove it just under 100km/hr (60mph) as to not exacerbate the condition. It rides and drives like a smooth Cadillac, the…
Last reply by khughes, -
- 22 replies
- 4.7k views
hey guys whats happnin im new to this forum and would like to get to know people with the same intrest as me. I just purchased a 240k coupe off ebay and im determined to turn it into a GT-R relica would like to know where to get some parts from Like Grill,Overfenders,taillights,badges,spoiler just to list a few so if any one can help me out it would be great also any panels and doors would be good Thanks
Last reply by 240kconvertible, -
- 2 replies
- 4.4k views
found this on ebay http://cgi.ebay.com.au/1974-Datsun-Skyline-240K-GT-coupe_W0QQitemZ160254692063QQihZ006QQcategoryZ35227QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Nigel
Last reply by curtis 240z, -
- 14 replies
- 3.2k views
I saw this on ebay, to me it looks like a C210 body style, but I'm no expert http://cgi.ebay.com.au/nissan-datsun-240k-2000GTEX-skyline-turbo-VERY-RARE_W0QQitemZ260248493164QQihZ016QQcategoryZ35227QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Nigel
Last reply by khughes, -
Help need about Delaney Power Extractor Engine
by Guest jhon77- 6 replies
- 2.1k views
Hello to you all, I was doing net surfing and found this new design theory. Is this one is as efficient as mentioned in site http://powerxtractor.com/ If it is then I may be interested in it. Thanks John
Last reply by ctcurnes, -
- 1 reply
- 2.6k views
I know this is retarded but I don't want to short anything so I'll make a quick post. How do I put this back together? Its an electronic distributor out of my 240z. The second pic shows the fireball igniton wire and mounting bracket. Where does the little ground wire go? And what hole do I place the mounting bracket in for the cable?? Thanks
Last reply by Noddle, -
- 34 replies
- 5.2k views
GOODWOOD FESTIVAL OF SPEED 2008 'Press Day' event: On 9th April I was honoured to be invited to this event by Nissan UK's press department, and was asked to bring along the 1971 KPGC10 Skyline GT-R to take part in demo runs up the Goodwood hillclimb course, and to display outside the house. Nissan UK had arranged for a new ( French registered, but RHD ) R35 GT-R to be brought along by one of their motorsport partners, and it was nice to have a C10-series GT-R and the latest R35 GT-R together in the UK for the first time. Well, what can I say? The weather was great, the other cars taking part were stunning, and the atmosphere was really friendly and relaxed. I haven't h…
Last reply by John Coffey, -
- 1 reply
- 1.5k views
very nice http://page17.auctions.yahoo.co.jp/jp/auction/v55357156 or for $78,000! http://page6.auctions.yahoo.co.jp/jp/auction/f68307187 now, just have to win lotto!
Last reply by Babalouie,
-
Recently Browsing 0 members
- No registered users viewing this page.
