Open Discussions
Open discussions about the early S30 series issues and topics.
8,797 topics in this forum
-
- 2 replies
- 1k views
Hey the dash on my 77 280Z coupe is cracked real bad and new ones are an arm and a leg, however I found a 76 280Z 2+2 being parted out and the dash looks fine in the picture, but would this dash even fit on my car? Thanks!
Last reply by Threehz, -
-
- 2 replies
- 1.2k views
where can i find clear front turn/park lenses and side clear marker lights???? i try with motorsport auto but they are out of stock and they don't know when they will be in stock again.
Last reply by JLPurcell, -
- 4 replies
- 1.4k views
Hi guys! Had an interesting day Sunday when I took the wife on a drive, essentially to "town". I have had trouble closing the passenger door on the 71 for awhile. You need to slam it pretty hard sometimes, the striker plate must need to be adjusted. Long story short, the wife slammed the door shut, and the glass in the passenger door shattered! I have Haggerty insurance so figure it should be a quick fix. I called some local glass places, no one can get NOS glass for passenger side. I need your help with a good source. But there is another issue. I have a 12/75 280Z on my property, pretty much a parts car, but it's not really mine. It has sat here for about ten months, …
Last reply by zKars, -
- 39 replies
- 6.1k views
As some of you may already know, I currently have my Z listed for sale on the sister web site to this - datsunclassifieds.com WE HAVE A SCAMMER ON THE PROWL ON datsunclassifieds. anyone here who has an ad posted or thinking of posting a for sale ad, BE ON HIGH ALERT. I just got this very oddball response to my ad on Thursday which screamed SCAM. Here is a copy of my E-mails - --- On Thu, 2/17/11, sam101_nino@yahoo.com <sam101_nino@yahoo.com> wrote: From: sam101_nino@yahoo.com <sam101_nino@yahoo.com> Subject: A message about your ad on Datsun Classifieds Dot Com 1977 Datsun 280Z Good day to you right over there,I will like to know if this item is still …
Last reply by Coolvibes86, -
- 15 replies
- 6.7k views
After replacing my rear main seal twice, and replacing my oil pan gasket. I still have the same small oil leak on the back of the block. I believe the only thing left that it could be is the side seals. The 2nd rear main seal I pulled out had no visible issues, and the 2nd one I put in I was very careful to make sure it had no burs and went in correctly. I saw the two side seals on the rear cap when I replaced the oil pan gasket, I guess my question is can they be removed easily and replaced once the oil pan is off? The FSM shows installing the side seals on a motor rebuild, but I've not seen any decent "replacement" procedure.
Last reply by cygnusx1, -
- 1 reply
- 926 views
I am trying to figure out if having bumpers fabricated in the U.S. could be cost effective. The first step in making them cost effective would be to get the CAD files for free;). I know that some members have experience with CAD and might be able to produce the files or know someone that does have them. I need these so I can present them to a few fabricators and see what it will cost to get the dies made. Any help would be appreciated. John
Last reply by Willoughby Z, -
- 10 replies
- 2.9k views
Car: '73 240Z Owned the car for only 1 week so far. I stopped by Nissan today to pick up an oil filter and they were a bit unsure of which oil filter was the correct one. They ended up giving me the part #15208-W1103 which after some research, appears to be for a truck. I've found the part #15208-65011 mentioned a few times on here as well as part #15208-43G00. Are there different part #'s for the different years of the 240Z or just one that fits all?
Last reply by Willoughby Z, -
hello i have a questions how old those a Z car has to be SMOG EXEP on the state of CALIFORNIA if any one could HELP me out THANKS
Last reply by conedodger, -
- 17 replies
- 3.6k views
Took the fuel tank out of my '73 240z on Saturday to get it boiled out. When I fill up the tank I would get a very strong gas smell, so I know I have a leak. Also, a couple of weeks ago when I went to get it started, I found that I had to blow out the fuel lines to get fuel to flow. I assume I had some debris in the lines. After taking the tank off, I'm convinced the leak was a hose and not the tank itself. When I lowered the tank to get at the hidden hoses, the hidden hoses ripped in half! I guess they were a little tired.. I drained the tank and didn't find much in the tank. The picture shows some debris, but I think most of it is dirt from the outside of the ta…
Last reply by Bonzi Lon, -
- 1 reply
- 2.8k views
I am wondering if any body is running ITB on there cars.I have seen a ITB kit for sale on ZCCJDM and im wondering if this would be a good upgrade for power. PFC silvey
Last reply by 70 Cam Guy, -
- 11 replies
- 2.1k views
So I'm planning on purchasing a 77 280z in the near future however it has been sitting for 8 years and the tires are flat. I plan on having it towed to my house but I'm definitely going to try and pump up the tires before hand. However if they leak I was thinking of trying fix a flat on them then pumping them up real well for rolling it around my house and garage. Is fix a flat a worthwhile solution to this or should I try something else?
Last reply by Threehz, -
- 8 replies
- 1.8k views
Found this cruising through the ads on CL. All I can say is... well I can't. I'm speechless. http://spokane.craigslist.org/cto/2323585420.html
Last reply by ZCurves,
-
Recently Browsing 0 members
- No registered users viewing this page.
jfa.series1
