Open Discussions
Open discussions about the early S30 series issues and topics.
8,795 topics in this forum
-
#1 Cylinder
by 444- 1 follower
- 2 replies
- 671 views
1976 280z, Automatic, 160,000 miles A few days ago I was researching the forum for a problem that I was having with my latest purchase and started reading different stories about adjusting valves, firing order, etc. I read where the number one cylinder was the cylinder closest to the radiator and continued on to number six which is closest to the firewall. The car I have now has number one at the firewall and number six at the radiator. I removed the valve cover and the distributor cap. When the cylinder closest to the radiator is at top dead center, (the mark on the crank pulley at 0 and both lobes on the cam up) the rotor button on the distributor is at the …
Last reply by 444, -
-
- 2 followers
- 8 replies
- 995 views
I was committed to updating the information pertaining the amp rating for the Maxifuses I used in the fuse block that replaced the fusible links but I'm embarrassed to admit I can't locate that post. Moderator's help in properly placing this update will be appreciated. Anyhow, here's the update. I have been running this set-up (pics below) for a couple of months without issues. The consensus was to decrease the amp rating of the fuses used as much as was logically possible to test how well they protected each circuit. I've made a point of driving with as much electrical draw as possible with the AC, headlights, sound system, turn signals when necessary, hazard lights…
Last reply by dmorales-bello, -
- 4 followers
- 26 replies
- 6.2k views
Hi, I bought a spot welder: a HTP Quick Spot II spot welder (along with a Tig welder) over the Black Friday time period (sale still going on now fyi) and was asked by someone reading my "bringatrailer" 240z build thread to share some information about it after I got it up and running. Well, here goes: Here is the spot welder. The special offer is currently $300 off on qualifying products when you buy the Tig welder. This spot welder counted as a qualifying product, so that is nice... It comes with the copper arms and tips you see in the pic. These are good to get you started with making spot welds in basic configurations. USAWeld sells oth…
Last reply by inline6, -
- 1 follower
- 18 replies
- 1.2k views
'72 240. Been having a periodic problem of flooding while at idle. Symptom is fuel bowl overflowing usually while sitting in traffic or after returning from short engine off period. My initial thought was that my 3psi electric pump was overloading the needle valves. But, this does not explain why it runs fine normally. So, this past weekend, I filled the tank (probably more full than usual and after the car sat in the sun for a few hours I smelled fuel and noticed fuel spilling out from the filler (with cap in place). So, I disconnect the vapor valve under the hood and blew through the vent line back to the tank...it was free flowing. So, my theory is hot fuel …
Last reply by David F, -
- 1 follower
- 0 replies
- 558 views
Hi everyone, I have been adding to my restoration/build thread over in the build thread forum area, and thought I'd post a link in the general discussion area in case anyone visiting here would be interested, but maybe would not necessarily see it otherwise. I hope to be adding some more video soon, but I have a bunch of picturesa and pretty regularly provide updates. You'll find details showing tear down, body work, mechanical work and reassembly as I go. I am targeting end of July this year for completion (probably wildly optimistic!). The car is a 1971, which spent working life in Arizona, and another 25 years in a garage in Colorado. It's getting a ro…
Last reply by inline6, -
- 1 follower
- 10 replies
- 884 views
Our late father's 1972 240Z is for sale in Texas. He was the original owner. Please note the mileage listed is wrong, as the gentleman handling the sale for our mother was not initially aware that the odometer had rolled over. I would be happy to try to answer any questions you may have. I stumbled upon this site by accident, so hope it isn't inappropriate to post this. Listing is here: https://sanantonio.craigslist.org/cto/d/marion-1972-datsun-240z/7056714243.html
Last reply by SGS, -
- 5 followers
- 15 replies
- 3.2k views
OK I can't find any info for this specific question online and I can't remember for the life of me how it came off the car. Where exactly does the fuel level sender harness come up through the unibody so it can connect with the body harness? I.e. which hole in the hatch area? There's a hole directly above the tank and I'm reeeeeeeeally hoping I don't have to drop the tank again because I did things out of sequence... Thanks in advance all.
Last reply by BoldUlysses, -
- 2 followers
- 8 replies
- 1.1k views
A 21,000 mile , 1970, Series 1 240Z just sold on BringaTrailer for $310,000 (U.S.). Not a misprint - there are six digits there. I tried to get into that page to see what people were thinking, but at 800 plus comments, the forum seized up. Might be a good time to update that insurance appraisal. Cheers All,
Last reply by swflaz, -
- 1 follower
- 0 replies
- 851 views
I am looking for various 240Z-related logos in vector formats (.eps, .png, etc.) that I can use for printing decals, etc. Does anybody know a place online I can find these? Looking specifically for the classic "Z", "240Z" and others. Thanks!
Last reply by Grubb240Z, -
- 4 followers
- 9 replies
- 1.1k views
Last reply by siteunseen, -
- 1 reply
- 567 views
https://www.foxnews.com/auto/1971-datsun-240z-sold-310000
Last reply by grannyknot, -
- 4 followers
- 58 replies
- 5.1k views
Hi guys, Do you recognise the Datsun 240Z shown in the pictures I attached? Supposedly it has LS3 + T-56 manual under the hood etc. nice things.. If yes, I would appreciate if you answered.. It is supposedly for sale now, but I just want to be sure whether it is a scam or a legitimative ad and deal... I just don't want be screwed.. That's why I am asking this.. Thanks for your help! To my understanding it was auctioned in Nov 2018 (based on browse results I found in internet).
Last reply by jonbill,
-
Recently Browsing 0 members
- No registered users viewing this page.
zKars
