Introductions and Rides
Introduce yourself to other club members and start making friends today! We also want to hear your stories, even from those of who have been on this site for a long time. Post your ride here and gloat a bit about what you have done or what you are going to do! 
2,380 topics in this forum
-
- 1 reply
- 1k views
Just purchased a 73 240Z out of Tucson, AZ. Typical AZ zero rust vehicle that was in storage for fourteen years so it is in need a mucho tlc. So far: Rebuilt the carbs New struts New brakes around Brake master cyl Clutch master New aluminum racing radiator New bearings and seals in the differential New bushings everywhere All new hoses and belts New waterpump New starter New fuel pumps Fuel tank to radiator shop for cleaning Adjusted valves Starts. runs, and drives great. The interior looks brand new. With only 108K on the ode I will probably drive it like this for a while before making any drastic changes. Will see if I can post some pics Bill in Prescott, AZ.
Last reply by Duffman, -
-
Here are my Z's. Been a fanatic of Z cars for longer than I can remember! The green Z is a 1976 280z, completely stock, just over 95,000 miles. Great runner and lots of fun. Currently hording parts and cash for a restore. The silver Z is a 1984 50th Anniversary. Again, completely stock with just over 50,000 miles. Excellent runner...tons of fun!!
Last reply by 72 OJ, -
- 12 replies
- 3.3k views
hi there.. i'm from malaysia and proudly to owned 1973 240z.. it's take me 4 years to get this car due his previous owner decline to sell as first place.. but i patiently try to convince the owner and finally after 4 years this car be mine.. i hope can get new friends here that can share information and knowledge in order rebuilding this car.. actually it very rare to find a 240z chassis here in malaysia.. and i'm lucky enough to owned one.. but it very hard to get a replacement part here. hopefully with forum community i can get some info and knowledge in restoring my Z and get some parts.. here i wanna share few pic of my z.. sorry if my english so terrible.. hehehe …
Last reply by MillionInOne, -
- 3 replies
- 1.1k views
Aye name's Ryan. New member to this forum and am loving it. I'm a senior in high school in SD and am going to be a MS1 (Army ROTC) at UCLA... I'm going to buy a 240/260z and swap a sr20det into it... anyone have any suggestions about the swap? Going to get it from Nasgasaki Motors... $1700 with shipping. Thanks, awesome site Ryan
Last reply by garofalory, -
- 2 replies
- 1.3k views
my name is Marcus, my older brother will be turning over his beloved datsun 280z over to me soon so i went out forum hunting and found this place. the car will be a new summer project for me being that I,ve got my hands full with my current project. the plan is to do a bone stock restoration of the car. its got a fuel injected inline six under the hood with 170hp. its a little ruff here and there but its nuthin i cant hadle:classic: the worst spot is around the tail lights but other than that its a solid car. soon as im done with my current car im going to see if i can get the old z started again.
Last reply by Maverick_Driver, -
- 6 replies
- 1k views
Well Merry Christmas to me after a 12 hour round trip finely picked up a 73' 240z and a 76' 280z. I'm not new to the z but am new to the 240 and 280's. I currently have a 1990 300zx na which I am in the process of restoring in class. Next will be the 240z. I'm sure ill have plenty of questions since I'm not to familiar with the straight 6 so its gonna be a fun learning experience. I'm finally going back to school for auto body thank god cause I love it I have always been into cars ever since I was able to walk Well I have a lot of reading and work to do once back from my Christmas Vac. Here are a few pics of the cars and don't worry more to come as I slowly work on her…
Last reply by lady24d, -
Meet 72 OJ 1 2 3
by 72 OJ- 31 replies
- 3.2k views
Hi ,,,,I just got a 1972 240 from your classified page////it is on the transport and will be in my drive by noon Tue Dic 13////the pictures and work done were the key factors in me emptying my wallet/////72 OJ will be the room mate to my 72 510 0range 2 door/////pictures on there way as soon it arrives to its new home.
Last reply by 72 OJ, -
- 15 replies
- 2.7k views
Hi, I'm Karl from Mautern in Austria. I found this forum during my research for my 40th birthday present: I'll going to renovate a 1973 240z. There is only one thing currently missing: the car :disappoin I hope I'll find many useful staff in here. regards Karl
Last reply by ThomasD., -
- 4 replies
- 1.1k views
hi my name is laurie and i am the wife and mother of datsun addicts. i blame it on my first car being a 510. now there are so many datsuns in my yard i cant mow. nice to meet all of you
Last reply by esmit208, -
- 1 reply
- 2.7k views
hey guys just picked this up today its a 1976 240k. And from what im told is a GT? it has gt badges on the front, door trims, and said the sides were changed to gl because someone kept stealing the gt ones? came with a 240K GT handbook too.not too sure if it could be a gt if someone could confirm? Its currently running a single weber carbie, but he gave me twin su's which i gather are from a 240Z?? i got it home and gave it a wash. didnt know datsun was japanese for 'leaks like siv' haha took it for a cruise down the beach and she cruises along nicely!! Its got some decent rust in both front doors, new doors are prob on the cards and i was bummed when i saw both …
Last reply by jackboxxx, -
- 5 replies
- 1.1k views
Hallo, my name is John and i am writting from Greece. I am looking for datsun 240z s30 for buy from abroad.Do you know classifieds where i can find i good one. As i check there aren't many these models in Greece. I want to rebuilt it but i don't if are there all the parts i will need. Could you help me? Is it possible? Furthermore, i can't give many money. Thank you in advance!
Last reply by black gold man, -
- 0 replies
- 876 views
Hey, anyone else from here? I am in Lafayette, CA. trying to get this sucker running after letting it sit for 5-6 years. Happy New Year everyone. Mike
Last reply by oyzuki,
-
Recently Browsing 0 members
- No registered users viewing this page.
Patcon
