Australia & NZ
578 topics in this forum
-
- 6 replies
- 1.8k views
Hey, I know this should go in classefeids but, since this is an aussie subforum and i really dont want to buy from the USA. I'm looking for a Passenger front valence corner (where the indicator/parker combo light bolts in) for a 240/260Z mine is almost 80% bog and I refuse to have that quality of panel on my rebuild. Ill give you a good price and pay for shipping, if you have a donor car and this is in reasonable nick please let me know. i'm also after a decent set of 260z 2-seater door trims, mine were speaker-bastardised by the previous owner and have no fabric/vinyl on them. many thanks. Kirby
Last reply by dat260, -
-
- 6 replies
- 1.8k views
For all you Western Australians out there, a friendly reminder of the next Sunday's Z-Day. This will be the 4th (I think?) annual Z-day should be a great afternoon out. Last year some 25 Z-cars turned up - wil there be more this year? For more details, visit www.wazcars.com or read below: Z Day 2005 Sunday 18th September 12:00pm– 4:00pm Wireless Hill in Ardross (entry via Telefunken Drive from Macallum Cres or Almondbury Drive) Events: All comers 240Z & 260Z 'Peoples Choice Competition' 240Z & 260Z REGISTER web site 'SUPPORTERS PERPETUAL TROPHY COMPETITION' Informal tours by the OWNERS of selected 240Z & 260Z's. If you own a 240Z or 260Z and would lik…
Last reply by Mr Camouflage, -
Bit quiet on the Aussie front. What's been happening?? Summer is coming along and I'm hanging to cruise the Z. God it feels like it's been a year since I last took her out. Aaanyway, hope you all enjoy the coming long weekend
Last reply by viparz, -
- 6 replies
- 1.9k views
Hey, i just got a catalouge sent out by victoria british, I was looking at getting a complete rubber seal kit. however when looking at the different parts and the different models, i came across a problem. My car as far as the ADR plate is concerned is a 2/76 model, however victoria british shows that my car VIN (010105) is actually a 1974 build chassis numbers (8/73 - 000001 > 8/74 060000). Or so I am lead to believe. Here (http://classiczcars.com/forums/printthread.php?t=16323&pp=40) suggests that there were two different series of chassis numbers for LHD and RHD cars.That is a LS30-010105 (LHD of my chassis #) could and would have existed aswell as mine in the R…
Last reply by Kirby, -
- 1 reply
- 1.3k views
Here is a link to a short recording of what my newly worked engine sounds like right above the stock carbie, with stock cam. It seems to use a lot of fuel when hammered. I will update this link as time goes by http://203.59.138.1/ have sum other photos at www.smokingwheels.myphotoalbum.com I would be interested if anyone could record what there car sounds like@WOT With No Load at various static timings. Putting you foot flat to floor only if you have a good rev limiter! send to smokingwheels@yahoo.com or reply to post with url etc
Last reply by smokingwheels, -
- 7 replies
- 1.8k views
Hi all, Haven't been on in a while i know, but i'm sure no one missed me haha. Well i've just recently sold my 2+2 off to a better home as the guy who bought it has nearly fully restored it in just over a month, so i think it was a good move. What i'm looking for is what sort of price i'd be looking to pay for a semi-complete 240z/260z 2 seater project. I would like one that has a complete interior/exterior but no engine. This is because i have plans for a V8 install, but i know if the other stuff isn't done i'll just never really get started like my last zed. Thanks all!
Last reply by 240znz, -
- 11 replies
- 1.8k views
Check out the price for this old japanese car... (of course, it hasn't sold...yet) http://carpoint.ninemsn.com.au/DesktopDefault.aspx?UsedCarID=1175482&TabID=3328&Alias=carpointau
Last reply by Alfadog, -
- 2 replies
- 1.4k views
I've had a hick up with the drivers door glass on my latest 240 project, door was dissasembled when I bought the car and theres a lot of spare parts that came with the car. Got it all back together easily enough but it looks like I might have used late 260 winding mechanism. Can anybody here tell me if there is a difference between the 240 and the later 260 2 seaters window winding mechanism seeing there is an apparent difference with the later model 260 2 seater doors? Thanks Sulio
Last reply by toecutter, -
- 1 reply
- 1.6k views
Im selling my project car.. a '65 austin healey sprite. Body wise it is very straight but needs very little work to get perfect. It has no motor in it..but has been modded for a datsun a14 motor, which I still have. I planned to restore it with a original bmc motor etc. It has wire wheels with knock off hubs. looking at $3100 for it.but i sill may keep and restore OR Anyone wanta swap for 240z/260z of similar value(prefer non goer)? email me for details datfreak@optusnet.com.au CAR IS IN TOOWOOMBA QUEENSLAND AUSTRALIA thanks scott
Last reply by datfreak, -
- 6 replies
- 1.4k views
Hi all, I've been trying to get some of the above bushes for my 2+2 and am having difficulting geting them in. I ordered a set of Noltec's about 4 months ago, had them arive at my local AutoOne but never picked them up as I was very busy at the time and the car was getting some rust removed at the time. Now I have the car back and some time on my hands I have re ordered them through the same place and they have not come in (more than 2 weeks when I was told it would be overnight). I have made an enquiry at another spares dealer and been told the part is discontinued???? Anyone know where I can get these from? Desperately need them to pass blueslip (only thing that I was…
Last reply by remedy, -
- 17 replies
- 2.5k views
Would a sticky on this topic be useful, for major parts anyway? Buyers and sellers should benefit, right now I have a good 240Z bonnet, both doors and other stuff for sale but don't have much idea on fair prices.
Last reply by dogma420, -
- 5 replies
- 2.1k views
Guys, I got a set of flares from Japan for my ZG buildip a year or three ago, and made up a mould of the flares for various friends race cars. I made a few sets and this is the last set. They would require trimming and filling of a few imperfections (they were destined to go on a race car) but are very dimensionally accurate compared with my set which came from japan and are supposedly very close to the original "ZG Style Flares". They are cut oversize (look rough but there is enough material for the buyer to trim back). I will be doing a few sets in woven fibreglass mat at some stage in the next 6-12 months, but it wont be a while as I have developed a nasty fibreglass a…
Last reply by toecutter,
-
Recently Browsing 0 members
- No registered users viewing this page.
Barneville
