Help Me !!
This is the emergency HELP ME forum for those of you that are having troubles with your Z-Car and need immediate help.
6,104 topics in this forum
-
- 4 replies
- 1.6k views
I'm trying to find this horn spring, I've tried all of the usual sources but no one seems to carry it. Thought I would ask here for suggestions before I start hunting around for something else to do the job. I've tried MSA, ebay, Amazon, Rockauto, Arizona Z car source. Thanks, Chris
Last reply by zKars, -
-
- 6 replies
- 1.1k views
Mates For the past three years (~14k miles) I've been running Eibach springs and blue tokico struts on my Z, which I put on myself along with new bushings everywhere.. A couple of weeks ago I noticed that when I went over speed bumps - which I hate doing - there would be a noticeable squeak from the suspension. I took the Z in for a tire balance the other day and was informed that the struts need to be replaced as they are "leaking." I could not find said leak when I was doing the brakes this past weekend. Well today I noticed that when I go over said speed bumps there's a noticeable tick (its annoying as hell) coming from the rear passenger's side. I'm getting the car in…
Last reply by Pomorza, -
- 3 replies
- 3.1k views
I just picked up my 72' 240z from the shop. I'm having issues with a few things before I'm able to even think about driving anywhere: (1) Alternator does not charge the battery or provide power to electrical system when car is running. Alternator was taken to machine shop prior to this, where it was re-wound and confirmed working. He also sold me a voltage regulator (modern solid-state), which is currently installed. I believe that I installed it wrong. Some pictures are below. (2) The Brake Booster Hose and Check Valve were removed by the shop, and it's been a long time since I've seen the car (almost 2yrs). The Check Valve seems to be an easy find, but does anyone kn…
Last reply by Zed Head, -
- 23 replies
- 2.5k views
My 72 240z is leaving in about 2 weeks to go live with my brother in Norway for the forseeable future. I've spent the last 2 years getting it prepped for this, and thought we had found a way around Eroupean laws as an imported vehicle. Evidently that is allowed for show only and must have amber turn signals to be legal on the road. I found at the beginning of this process somebody who was reproducing them, but cannot find the site now. I would prefer an original set but at this point I need something that will be legal. Help! Devin
Last reply by esprist, -
- 6 replies
- 2.3k views
Need some advice on whether (or how) to fix or replace my exhaust manifold. PO retapped and replaced original collector studs with 3/8" bolts. We broke one bolt when pulling the exhaust system out. Long story short, the extraction didn't go well and we tried to JB Weld a new 3/8" stud into place. The JB Weld didn't hold as I was reinstalling the exhaust so now I'm left with two good 3/8" studs and one stripped hole. Options (as I see them): 1) Try to get someone to weld in a stud with the manifold still in the car. 2) Pull the manifold and replace with used OEM. 3) Pull the manifold and replace the entire exhaust with aftermarket. 4) My father is trying to convince me to …
Last reply by cbuczesk, -
- 7 replies
- 2.1k views
I'm redoing my compression rod bushings but the sleeve on the end seems to be seized onto the rod. Does anyone have any suggestions for removing it?
Last reply by Mikes Z car, -
- 10 replies
- 2.1k views
So a few months ago (august 2013 ish), my Dad bought a 1977 280Z, we really like it and has been fairly good so far, but recently things have been heading a little south. First, we started noticing that after driving it, the passenger side of the front window would fog up, my Dad and I never thought much of it, I had just assumed it was something old cars did. But upon further inspection after a tip off from one of my friends, I found that the carpet on the passenger side was SOAKED in coolant. Yes, I know, how we didn't notice is completely beyond my understanding. But, I got to work. I pulled off the center console, labeled everything for later, and plastic bagged all …
Last reply by akre28, -
short circuit 1 2
by jcb- 13 replies
- 1.6k views
Tail light circuit has a dead short, blows fuse. With no fuse in place If I short across the switch, power to tail light circuit, it goes to ground. Am I correct that the short is somewhere between the switch and the fuse. I have traced the loom to the rear and can seen no area that looks to be damaged. Everything was fine and suddenly a dead short. Any suggestions are very much appreciated. Thanks. JB
Last reply by SteveJ, -
- 26 replies
- 4.1k views
I'd like everyone's opinion. I have a white 1972 240z. It has slotted mags and black interior. I orderd the black "240Z" side stipes almost a year ago, (right after I had it painted). I keep planning on installing them,...but everytime I plan to start,..I look at the car in plain form and back out. At other times, I feel the car looks too bland and I think the stripe would "jazz" it up a little. I look at the gallery and see several of the Z's with the stripe and I really like it. I may end up selling it in another year or two,..so i should factor sale-ability into the equation too. I'd like to hear everyone's opinion. Should I install the stripe or not.
Last reply by 73str86, -
- 22 replies
- 2.9k views
I need help identifying these carbs. The other day I went to autozone and had ordered a rebuild kit, however after looking at the kit and then looking at the carb and back to the kit, then to the carb, ect. i came to the conclusion that the kit was wrong. The carbs say z therapy on them so im pretty sure these are not the stock ones. There are three screws holding the bowls on but not sure if there called the three screw su carbs. I got the rebuild kit cause this carb in the picture was leaking on the bottom, the screw driver is pointing to where it was leaking fuel. not sure if I need a full rebuild kit but where is a good place to get one? Is there somewhere that kinda …
Last reply by 3ryce, -
- 18 replies
- 1.5k views
Hi, I just bought a 240z which has some engine issues. In short: The idle is very rough and initial pickup out of neutral slow. The biggest problem: The engine won't rev over 4000 under load (2nd gear and up). I did reset the point gap which made the idle a bit better (Before it would misfire and run on only 5 cylinders in idle. Then again, the gap was about half what it should be...). Since the valve train sounds a bit too noisy to me, and the valve clearance could be the source of the 4k problem, I measured the valves. If the measurement has been done correct ( I think it is, however it is the first time I did it) the Valve clearance is way to big. However I was not abl…
Last reply by wenzlern, -
- 7 replies
- 1.6k views
Does anyone recognize either one of these as a thermotime sensor? I am trying to trouble shoot my cold start circuit and I am not sure if I have thermotime sensor. Thanks Glen
Last reply by 5bzhive,
-
Recently Browsing 0 members
- No registered users viewing this page.
jfa.series1
