Help Me !!
This is the emergency HELP ME forum for those of you that are having troubles with your Z-Car and need immediate help.
6,104 topics in this forum
-
- 1 reply
- 928 views
I have sand and dirt between the rubber gasket (shim?) and the glass that I would like to clean. Is this as straight forward as it seems? Anything to watch out for putting it back together? Thanks! Steve
Last reply by grannyknot, -
-
- 3 followers
- 72 replies
- 7.8k views
So I posted a while ago about some high idle issues I'd been grappling with. I still have a bit of an issue, but I think I've found where it's happening. I have a 240z with an L28 Engine block, a P90A cylinder head, and SU round-top carburetors. I took some pictures and videos of what's going on: https://photos.app.goo.gl/xft1yprkDfB7egaW6 I still have to dial the timing in. I think I might have a slight vacuum leak between the intake manifold and the cylinder head. I sprayed some carb cleaner around that area and the RPMs increased a bit. Is it okay that I have this intake manifold with the SU carbs on the P90A head? I've also removed the fuel rail and the…
Last reply by Alex240z, -
- 3 followers
- 10 replies
- 1.4k views
Hello, thanks to the help of the many fine gentlemen on this forum, my 280z seems to be running decent now. After doing various tests the car seems to run decent, timing needs to be done along with a new starter(positive wiring wiggles causing a poor connection). I also ended up finding one major issue which was a bad fuel pump after upgrading to a walbro 255 the car does not die anymore. Sadly the car does having a ticking noise which seems to my dad to be loud injectors, but I presume a worn rocker arm. I need thoughts on the noise the first link is where the engine is running horrible due to what I believe to be it choking for fuel, right after the pump install the eng…
Last reply by dylancorrea1, -
- 1 follower
- 11 replies
- 1.9k views
Hi guys, So I'm having a strange issue here. I recently changed my fuel injectors and fuel filter (for the first time in 4 years) and the car started up on the first crank but gradually started taking longer and longer to start with each drive. When I unhooked my old fuel filter to change it, the gas coming out of the bottom was black for some reason (the gas coming out of the filter was clear though, so the filter was working). I went to my local parts store and rented a fuel pressure gauge then spliced it in between the fuel filter & fuel rail. When I primed the pump by turning the key to "on", the gauge read 10psi. I cleared the gauge and primed the p…
Last reply by chaseincats, -
- 3 followers
- 14 replies
- 1.5k views
Hey guys I was so excited to get the 260z running today for the first time after rebuilding the carbs, changing all fluids, belts and radiator hoses. I tried getting it running and it was cranking but not starting. Sprayed some starter fluid into the carbs and started for a second then died. Took a look at the inside of the carb and realized it’s not getting any fuel. Pulled the line from the mechanical fuel pump to the fuel rail and no gas there either. Pulled out the mechanical fuel pump to make sure that the arm is in the right position, and it is. Tried to manually pump it and didn’t produce any gas. Chased back down to the plastic fuel filter and didn’t have any gas …
Last reply by SteveJ, -
- 10 followers
- 381 replies
- 38.1k views
Hey, just bought a 1977 Z that im waking from a long +15 year comma. Loloking for guidance as to what i should do and in what order. Compression check done. All Cylinder are in the 180s except 1 which showed 145. I changed all the plugs, oil and filters. I also drained the old fuel and fuel filter. Radiator was empty and thermostat had disentegrated cavities in the cooling systme had white powered residue. Car will only turn over when i jump the starter leads with a screw driver and get nothing, no power when tunring the ignition key, So what do you all recommend I do next? Will post pics of the car when i bought it. Ive had it about 10 days.
Last reply by Av8ferg, -
- 1 follower
- 4 replies
- 1.5k views
Hi, I have an early series 1970 240Z. I was recently told that this car was originally sold without a stock splash pan. Is that correct for the series 1? Thank you.
Last reply by DedZed, -
- 3 followers
- 6 replies
- 960 views
Hello, I have a 1973 Datsun 240z, I had the turn signal assembly refurbished and when reinstalling it the horn will no longer work. I noticed the copper arm on front of the assembly so when I press that on the back of the steering wheel the horn works. If I rest it on the back of the steering wheel the horn blares constantly, if I press the center of the steering wheel or not. I assume it is something simple and I am just a noob but I don't know. Any suggestions?
Last reply by siteunseen, -
- 3 followers
- 19 replies
- 1.4k views
Hello All, I "mostly" finished my '77 280z last Summer but I never did get it running right. I've searched this site over many topics and still haven't found the culprit. The car starts easily and idles nicely. It accelerates ok but holding a steady RPM causes the car to miss. At least that's what it feels like. The engine seems jumpy, like its running out of gas. It seems to get worse the longer I drive. Giving it gas seems to make it go away until I let off the accelerator again. Car History: I bought the car almost ten years ago. Drove it home and don't recall having any running issues. For the ten years I was real gung ho at first but then the car took a back bu…
Last reply by Captain Obvious, -
- 1 follower
- 3 replies
- 1.3k views
Hello all, I recently over cranked my window and heard a loud POP and stripped out the window regulator in my driver door. I'm wondering if anyone happens to have a spare for a 70-73 that I can buy. I haven't had any luck sourcing one.
Last reply by texasz, -
- 3 followers
- 10 replies
- 2k views
5/71 240z. Went to the market. Car cranked twice then lost all electrical power. DVM confirms the fusible link is open. AAA towed it home, but it needs to be moved. Is there an emergency hack that I can create to allow the car to move short distances, until a stock or upgraded replacement arrives? Thanks!
Last reply by Zpenman, -
- 2 followers
- 12 replies
- 3k views
Seeking some advice, I decided to upgrade my stock alternator with a 80amp alternator from zcardepot. I also installed the internal regulator adapter as well and have that plugged in. I currently have the large white/red wire coming from the starter to the B terminal on the alternator. I have the white/black stripe wire (L lamp signal) plugged into the ignition key pictured below in the diagram ( which is the pink wire in my picture below) And I have the yellow wire (sense signal) which is the green wire in my photo plugged into to the 12v post in the picture diagram below. And I have the black ground wire on the casing of the alternator. …
Last reply by S30Driver,
-
Recently Browsing 0 members
- No registered users viewing this page.
