Help Me !!
This is the emergency HELP ME forum for those of you that are having troubles with your Z-Car and need immediate help.
6,104 topics in this forum
-
- 2 replies
- 1.6k views
is there an place on this cite, or any site for that matter that has informtion on what to look for when buying a 240 Z. Where rust is ok. Is this really the year that the seller is saying it is? Please help. I really want to buy a Z, I am just afraid of getting a lemon
Last reply by 2ManyZs, -
-
- 4 replies
- 1.8k views
I have a 72 240Z and recently I've noticed that the oil pressure drops down to around 10-15 lbs at idle, then goes up to 30-35 while on the hiway:mad: I know this isn't normal, I've been told that it could be the bearings. What do the Z experts think, and is it safe to drive as long as I'm getting some kind of pressure.
Last reply by AxtellZ, -
- 1 reply
- 1.7k views
Another question fom the IE5.5-less Eric Bauer: _ I've seen quite a few DCOE Webers carbs for sale and although they can sometimes share the same diameter (ie 40mm, 45mm, etc), there's a second number that rarely matches. ie in the name: 40mm DCOE 18 for example what does the 18 stand for? _ Here I am looking at some detailed pics of the Fairlady 432 with its S20 engine and triple Webers. Now of course we know that the S20 cylinder head is a cross-flow where our stock L24 ones obviously aren't. What I was wondering about is why on the S20 the carburetors are bolted directly to the cylinder head? None of the triple carb setups for US 240/260/280 that I have seen ever come …
Last reply by 2ManyZs, -
- 1 reply
- 1.4k views
I was asked to post this for a member until he is able to set up web-software at home. Please reply to this message in the forums. Thanks. Here it is: Hey Mike, I need your help please. Can I please ask you to post the followig dilemna of mine on the Help Me section of the Forums while I try to find a version of IE5.5+ to download for home use? Last monday night while running errands I park the Z in a lot and go into a store. I come out 15min later and headlights and brakelights suddenly do not work anymore. I only had working sidemarkers, turn signals, and hazard lights. Because of my work schedule I couldn't get to it Tues/Wed/Thur. Friday I looked into it. Of …
Last reply by Daniel, -
- 3 replies
- 1.6k views
I just bought a silver 240Z and I've got a couple of little things that need fixing up and I'm not too sure about it ... 1) Does anyone know what type of screws are used to hold the center console between the driver and passenger seats down? The screws were taken out when I got it and I'm not sure what size to put back in :-/ 2) Has anyone put new speakers into their cars? How easy is it? What size can you afford to put in? (my car doesn't have any speakers atm ) 3) Did the original 240Z seats have those little ventilation (?) holes down the bottom of the backrest? 4) My driver side door can't be closed very easily... is this easily fixable? 5) The bootlid doesn't al…
Last reply by Alfadog, -
- 6 replies
- 3k views
Problem: The water pump bolt {one of five} that bolts on at the 10 o'clock position {71 Z} has broken off deep inside the block. Why is this bolt 3 1/2 long? Is this length necessary to get past the aluminum block? Is the block not aluminum? Has anyone had the experience of drilling this bolt out at this depth? Is it possible to tap the hole as it enters the block and installing a new shorter, fatter bolt in the new tapped threads? I am looking for enough pressure to keep the gasket from leaking, {or blowing out altogether} the first time I drive through Baker, California when the temp outside reaches 120 degrees. Right now there is no leak because I applied a bit more p…
Last reply by Cliff. Elford, -
- 4 replies
- 4.8k views
73' 240Z, What is the torque for Diff Cover? Can't find it in the FSM or in Chilton's. Thanks in advance.
Last reply by 2ManyZs, -
- 4 replies
- 2k views
Sheesh, what a time to be stranded from my computer for two weeks. Been on vacation and furlough for a bit now, and finally took over dad's computer tonight to get some much needed help from you guys! Here's the timeline of any issues that may or may not be related. Second week of January - Noticed gas mileage dropping drastically in my 240, from approximately 24 mi. per gal to 18 mi. per gallon, and also heard my car backfire for the first time (should also mention that it did it multiple times after that first time) in the year that I have had it. Somewhere around Jan 16th or 17th, my starter stuck one morning when I was ready to leave for work. It was humming even aft…
Last reply by Zed2k, -
- 1 reply
- 1.6k views
How do you determine a E33 from a N36 manifold? Is there a set place where they are marked?
Last reply by 2ManyZs, -
- 2 replies
- 1.6k views
I've just had my 260's 5 speed reCONNED about 10,000 k's ago, and it has just started to play up.... Earlier today, I took off from the lights, reved my triple webbered L28 to 7 grand, shifted into 2nd....no problemo.......reved her to around 7 and a half grand.....shifted in to 3rd.....all is sweet....... pressed the accelerator flat to the floor, rear wheels spin (I'm running about 170kW through a 4.625:1 diff)....wait until tacho reads about 7 grand, take my foot off the gas, press the clutch pedal flat to the floor, grab the gear knob.... attempt to shift into 4th.....BUT IT WON'T MOVE !!.... Now I'm coasting down the road with the clutch pressed to the floor and I ma…
Last reply by 2ManyZs, -
- 2 replies
- 1.9k views
my beat up 72 240z has alot of issues....thanks to all for the help with my carbs.....i think its the manual choke as well as using the wrong oil in them..... on with question 2....my hood release latch is stuck open...and ive tried to contact nissan auto parts..(nissanautoparts.com) to get another one but have got no response the few times ive requested a quote....an i gave up.... is there any way to free it up by drowning it in oil?...... or does anyone know where to get one....? i guess this question should be directed to another forum.....sorry thanks, jason
Last reply by Daniel, -
- 3 replies
- 1.6k views
I just spent all day pulling off 72 SUs & E88 cylinder head off my parts car, then doing water pump+fan belt+spark plugs+condenser+cap+rotor on my car.Now after all this I realize I forgot to mark my distributor cap with the numbers of the spark plug wires.... I know the firing order from the Haynes manual, but nowhere do I see any indication as to which post corresponds to #1 cylinder. Can someone help me please? THanks. -e
Last reply by PetesPonies,
-
Recently Browsing 0 members
- No registered users viewing this page.