Help Me !!
This is the emergency HELP ME forum for those of you that are having troubles with your Z-Car and need immediate help.
6,104 topics in this forum
-
- 1 follower
- 11 replies
- 5.4k views
My tank leaks. Not sure if i will be able to get it fixed or if i have to have one built. History: current tank is aluminum rectangle type custom with no sending unit. whether i fix or build i want sending unit. but from what i have heard the 1970 240z sending is 90-10 ohms. Problems: 1-Tank does not have sender so hence no sender retainer to attach the retaining ring for use with the original sender. 2-cant find a retainer to weld to the tank so that the original sender can be used. 3-Might not have enough room for fuel sender arm and may have to use vertical; tube or uncovered. 4-all aftermarket ones are 0-90 or 70-10 or some other ohms but no…
Last reply by 240z70, -
-
- 1 follower
- 8 replies
- 2.9k views
I installed 260 doors on my 240 I have found that the 240 regulator does not fit I purchased 280 regulators they do not fit does the 260 have its own regulator?
Last reply by cgsheen1, -
- 1 follower
- 19 replies
- 5.7k views
I am trying to find a good replacement for the gas tank drank plug and washer. Does anyone know where to get them? My washer is disintegrated and the bolt has a slow leak and I am not even sure it’s the correct plug. Sent from my iPhone using Classic Zcar Club mobile
Last reply by AZDatsun, -
1jz swapped 280z 1 2
by 1j280z- 2 followers
- 21 replies
- 3.5k views
About 2 years ago I purchased my 280z for 300$. It was a rusted sad looking car that was stripped. I brought it home where I didn’t have a garage and just started stripping it. I got laid off that winter so I took it down to bare chassis. I took all of the suspension pieces and brought them to bare metal and painted them all. I put the car back come spring time then stripped the engine bay and interior following with a coat of paint. For a while I was gonna go with the 280zx turbo motor but then i changed. I ordered a 1JZ-GTE non VVTI and grabbed a trans from a Pontiac solstice. I taught myself how to weld when patching the sheet metal then took classes and actually got a…
Last reply by 1j280z, -
- 1 follower
- 2 replies
- 1k views
I've been searching for an air filter housing to put onto my round top SUs, but holding out to find the mounting hardware. I have an offer for the housing in great shape, but the seller is telling me he has the mounting bolts (both sides of the wing nuts) from a flat top setup that should work. Does anybody know if these flat top wing nut bolts will work on the round tops? Thanks!
Last reply by Geoff's 240z, -
- 2 followers
- 21 replies
- 5.9k views
So I recently rebuilt my spare l24 by replacing main/rod bearings, piston rings, head gasket, oil pump, water pump, timing chain/sprocket/tensioner/guides, valve stem seal gasket, distributor stator/ ignition control module, ignition coil, plugs/wires... I’m sure I’m missing a few things but I’m sure you get the gist. I haven’t had any luck starting the engine. Starting fluid just makes the car backfire through the exhaust My l24 has triple Weber 40 DCOE’s (NOT running chokes or vacuum advance) a 280zx distributor and the rest is pretty much stock. The engine does have compression. SPARK I have checked spark with a spark tester and I have spark in …
Last reply by 240260280, -
- 1 follower
- 7 replies
- 983 views
I'm still unsure when my 71 was built, I understand that the early 71's had vents on the back hatch. Mine doesn't have them, I'm sure it's the original hatch, the color matches the rest of the interior paint. Were there ever vents on the rear quarters VIN HLS30-41253
Last reply by BLZ71, -
- 2 followers
- 21 replies
- 12.9k views
im helping a friend of mine take out his blown(as in ruiined) l28 and replacing it with another what all do i need to disconnect remove b4 i can do this. and where are the best place to attach the engine hoist chains. i have already removed fuel lines and belts radiator line and all the obvious things. do i need to pull it with the tranny still attached??? any input would be apreciated. also anylinks to helpful websites would be great
Last reply by jonbill, -
- 1 follower
- 6 replies
- 1.1k views
Hi, i have some (hopefully) easy to fix problems with my 1978 280Z. The car has a pre '81 5 speed in it with a R200 diff. The first problem is a buzzing/mild grinding noise coming from the gearshifter especially in 5th gear, which gets louder the fast you drive. I checked different forums for this problem and the suggested solution was always checking the bushings and plastic cap on the stick. I did that, they are Nissan OEM parts in pristine condition ( is suspect a previous owner swapped them). I am pretty much clueless right now if this is just normal or a serious problem with the gearbox. The noise dissapears if you hold the stick tight in the right position. …
Last reply by Johnny280, -
- 1 follower
- 1 reply
- 680 views
Hey All! I just purchased a L28ET engine with the P90 head and F54 block from an 81zx turbo. I want to build the engine up and put it in a early 240z. I am thinking about switching it to triple carbs. I am going to go with performance cam. My ideal goal is to get around 250hp out of the engine. Any advice or help on what I should do to this build to get those numbers and have a great performance street engine with around 250hp let me know! Your help is much appreciated! Thanks!
Last reply by CokeleKA, -
- 6 followers
- 148 replies
- 16.3k views
Hey everyone, I have been a long time lurker on many forums and I have decided to post some questions because I am at the point where I believe I need guidance on next steps and want to make the right decision. The car I am working on is a 78 280z California Car. It is not my car, it is my parents car that I bought them as a gift 10 years ago. It has been a long time since I have driven the car so I don’t recall its characteristics but it always had a presence of fuel smell in the exhaust. The car was parked because the fuel smell and rough driving started getting worse. The car then sat for a year and a half and now its time to get it back up and running. All the items a…
Last reply by siteunseen, -
- 3 followers
- 2 replies
- 952 views
Looking for a good Z shop in the Santa Monica area if anyone has a recommendation.
Last reply by SGarrett,
-
Recently Browsing 0 members
- No registered users viewing this page.
