Interior
35 topics in this forum
-
seats
by Ken Lazell- 2 replies
- 3k views
New on here...fixing up a 81 280zx and the seats are completely shot. does anyone have any experience with Cipher Auto seats? I am looking at these CPA1007CFBK but the price seams so low???
Last reply by Ken Lazell, -
-
- 0 replies
- 2.4k views
In search of a T-Top for a 1980-1983 280ZX 2-seater with the Silver/gray vinyl interior/inner panel, Left Driver's side. Have seen a few on EBAY, but cannot find with the Silver/gray vinyl interior/inner panel. Thanks everyone for your future help. Gregg
Last reply by gerick75, -
- 1 reply
- 4.6k views
I've had a vacuum leak SOMEWHERE under the dash that was causing problems with the HVAC controls. Specifically, when the engine was under load, vacuum would disappear, and the AC would blow out the wrong vents. Other HVAC settings didn't seem to work quite right, AC only worked on the coldest, recycle setting, not on the FRESH setting, and VENT didn't seem to work at all. (This was after my earlier fiasco with the rotary valve in the HVAC control head being mis-aligned, detailed in another thread) Another commenter here suggested checking the ends of the vacuum lines where they attach to the vacuum storage cannister. (Photo 1) They were OK. To CONFIRM the problem…
Last reply by Wade Nelson, -
- 9 replies
- 6.7k views
I've have this Heater box I'm trying to reinstall now that I've replace the Water ****. My problem is there are 3 Vacuum valves on the left side of it and I am unsure of what vacuum hoses go to what. I have the FSM-Factory Service Manual and have even printed out the Vacuum lines schematic, but like many others can't make sense of it? The back 2 Vacuum Valves have 2 hose connectors. One on the bottom, which activate the control arms on the other side (and make it operational). The other on the side. Yet I have found no pictures (anywhere online) of what each one of these Vacuum Valves are even called. I have a manual AC and one Vacuum hose coming thru the firewall from t…
Last reply by Wade Nelson, -
- 1 reply
- 3.7k views
i'm the guy that got the 280ZX seats that had been sitting in a garage for 20 years, after the owner put in Recaro's. Saw the ad on Craigslist and jumped on it. $200 for a pair of PERFECT condition original seats. Would you have driven 892 miles for a pair of NOS seats?
Last reply by Unkle, -
- 3 replies
- 4k views
So I have the common dual cracks in my dashboard for a 79 zx, are molded dashboard covers a good fix?
Last reply by gompers, -
- 9 replies
- 3.6k views
The previous owner of my '83 replaced the carpet, and it looks a little funny. The carpet itself looks nice enough, but it slides around and it now receding from the area where it should be tucked under the center console. I'm fixing my mirror switches today, so I'll have the center console torn apart anyways and my question is, what do I put under the carpet to get it to stay put?
Last reply by zbane, -
- 1 reply
- 3.5k views
Knob on the dash below my ignitions switch, little do-hickey that sez "pull down to open." to open WHAT?
Last reply by Wade Nelson, -
- 2 replies
- 3.6k views
i am in need of a few interior parts can anyone tell me where i can get these peaces
Last reply by bigmime4098, -
- 6 replies
- 3.4k views
ok i mite just be dumb but that is the lil lever under the dash attached to the lower dash panel that two vacuum lines hook too
Last reply by bigmime4098, -
- 1 reply
- 3.3k views
I am seeking a good condition Brown shifter knob for an 83' 280zx, coupe. Anyone know good resource for NOS & OEM parts? thank you
Last reply by norcal z, -
- 4 replies
- 3.5k views
The Antenna Motor on my 83' 280zx coupe is noisy. I can't imagine that it was that loud when new. Is there a way to lubricate or tune up the motor that raises and lowers this? thank you
Last reply by zbane,
-
Recently Browsing 0 members
- No registered users viewing this page.
