Group Buys
A forum for discussing group buys, group discounts, or purchases at a discount as part of the club. If you're considering a group buy project, or just looking to see if there's a group buy available, you can organize it here.
30 topics in this forum
-
- 2 followers
- 2 replies
- 2.7k views
Hello, This follows on from this thread; As I have had a couple interested parties in the ribbed rubber part, lets see if we can do a group buy/small production run. From the above thread; The ribbed rubber foot grip is usually ripped on on original un-restored footrest, so finding one intact is good. Sometimes the original rubber grip looks like has been put on in a hurry at production, and can have the ribs running crooked. There is a Nissan part number for this, which is NLA. There is a re-production one on Yahoo auctions, but it doesn't look right. Yes, you could use some ribbed floor matting, but the finding the correct ribs, and then they look wrong …
Last reply by RIP260Z, -
-
- 1 follower
- 0 replies
- 2.4k views
Hello I would like to share with you guys about what I was lucky to find. These guys https://www.woodensteeringwheels.com/ can make any kind of custom steering wheel and whole dashboard. It's a great option to restore your old car.
Last reply by Rosgar, -
- 3 followers
- 6 replies
- 5.8k views
Hi guys,I'd like to extend the opportunity to purchase some of my automotive artwork via a group buy, at a discounted rate. My latest illustration is a Datsun 240ZG that is printed on a sheet of brushed aluminum. The beauty of this process allows you to actually see the texture of the brushed aluminum, where typically you would see any white color on a paper on canvas print. The piece measures 2 feet by 8 inches tall, and comes with a wooden mount that allows you to mount it directly to any wall. You also have the option of selecting either a matte or glossy finish to the whole print.I have worked out a deal with my printer that allows me to offer a discounted rate on an …
Last reply by Mike, -
- 2 followers
- 247 replies
- 33.2k views
Who would be interested in a Bolder Tint? If you are older than 40, you remember them. Mirrored mylar with block-letter logos that stuck to the inside of your windshield, like so: After several years of looking, I have made a breakthrough. I have located and contacted the original manufacturer of the Bolder Tint brand. While the company no longer does automotive products, he does still have the original dies for the S30 windshield, and is willing to do a batch for us. These would be the real thing - true Bolder Tints by the original maker, not replicas. Here's the ground rules, and where we stand on this: 1.) This would be an exclusive to CZCC. The manufacturer want…
Last reply by Pop's Z, -
- 3 followers
- 12 replies
- 3.9k views
I have a Datsun buying problem in a big way and i have over committed. In the last year and some change I have gone through the process of purchasing six of them. I've got more parts then I know what to do with. Hood with louvers in good shape, gas tank for a 75, su carbs, trim motor that has been board out to much and we can't get compression down n42 block. Need to sell some and focus on just one or two of them. Have a 83 parts car f54 with p79 head five speed. Ive gotten to the point where I was contemplating a group sell but not sure how smart that is. 78 280 75 280 and a 83 parts car. If anyone needs anything or has any input on what to do would love to hear it Sen…
Last reply by 78datsun3.3, -
- 1 follower
- 3 replies
- 5.7k views
After nearly 5 years of serving the Datsun community, Vintage Chrome will be terminating the service by the end of this year. There comes a time in most every entrepreneurial venture when you reach a point in which you have a tough decision to make......"get big or get out". Unfortunately, achieving significant growth at this stage of the venture would simply require a commitment of resources that I am not prepared to make at this stage of my life. So, I have decided that "getting out" is the best course of action for me and my family. I know that there are members of the club that would still like to have some plastic parts chrome plated, so I am announcing a fina…
Last reply by 9teen7t240z, -
- 2 replies
- 5k views
Attention Triple Weber Carb L6 Owners, Datsun Spirit Inc. has developed version two of our popular triple carb heat shield. Our latest version supports triple Weber DCOE, OER, Delortos and Throttle Body Fuel Injection setup on the L6 engine. The heat shield is custom made by our shop to have a precise fit, rigid support, and superior function. The brackets are zinc plated to resist corrosion and superior look. We will continue to offer our version one heat shield that supports triple Solex/Mikuni carbs as well. We are offering a group by for the initial offering of our newly redesigned heat shield at a reduced entry price and with free shipping to the lower 48 States. Dep…
Last reply by Mike, -
- 0 replies
- 4.3k views
Hey guys, We are releasing our V2 headlights in the next few months. We haven't released them to any of our dealers yet so we are able to offer a group buy. These retail for $499+ and we are holding a group buy for $299 a set. The GB is being organized on hybridz here: Dapper Lighting Version 2 Projector Headlights - Group Buys - HybridZ You can design your own kit: 1. Halo or No Halo (Same Price) 2. Black or Chrome (Same Price) 3. Halogen or HID (35W/$100, 55W $110) 4. LHD or RHD Let me know if anyone wants to be added to the GB and we can start our own list here. Thanks! Ben
Last reply by bens1088, -
- 19 replies
- 7.8k views
Any interest in a group buy for HID projector headlights? Benefits: -Everything is included (housings (Classic or Modern), 6,000K bulbs, Heavy duty relayed harnesses, and 35W ballasts). -These kits are plug and play for the most part meaning no splicing into your stock headlight harness. -These are a substantial upgrade from your stock headlights and use heavy duty relayed wiring kits to protect your stock wiring. -Significantly improved visibility at night Choices: -Choice of our "Classic" or "Modern" kit -Optional upgrades including slim 35W ballasts, 55W ballasts, OEM Nissan and Toyota ballasts -Upgraded Morimoto Bulbs (available in 4,300K, 5,000K, 6,000K) …
Last reply by nissanthanh, -
- 2 replies
- 7.8k views
Through a thread on Hybrid Z on CV axle problems I've developed a new short CV axle set for people running Modern Motorsports CV adapters. The thread is here: http://forums.hybridz.org/index.php/topic/100094-cv-axle-discussion/ What I am offering is a pair of Z31T CV axles shortened to fit a 240Z running Modern Motorsports CV adapters. I haven't checked lengths on 280Zs but I think they would be the same. These shafts will be sold with no joints, just the bare shafts, LH and RH side, and are chromoly with the inner snap ring groove removed and the splines tapered to substitute. Tapering the splines instead of cutting straight through them for a snap ring removes a blatan…
Last reply by Joseph P Siam, -
- 1 follower
- 0 replies
- 3.8k views
Our plastic chrome plating business has done well in 2013, but the root of our business and resulting success lies with the members of the world wide Z community. Based on that and as a gesture of our appreciation, we have decided to offer a year end special on plastic and metal chrome plating specifically targeted to members of the Z community. The year end special will offer a 10% reduction off of our standard pricing for any plating needs for our Z cars. The offer will work as follows: 1. We have one shipment remaining for 2013 so all customer orders must be received by us at our Las Vegas depot by December 18. Turn around time will be approximately 45 days. 2.…
Last reply by Mike W, -
- 10 replies
- 5.2k views
During the restoration of my 1974 260Z, I found numerous plastic parts on my car that needed to be re-chromed in order to restore them to original condition. Trying to find an affordable plating service that could perform this work was nearly impossible until I ran across a service that had been promoted on this site with a group buy opportunity. I took the plunge, had a number of parts from my car re-chromed, and was very happy with the results as well as the pricing. This service was provided by Mike Robbins, aka 9teen7t240z. As a result of this transaction, I had numerous conversations with Mike about the potential of working together to broadly promote this…
Last reply by nix240z,
-
Recently Browsing 0 members
- No registered users viewing this page.
Parman
