Posted February 3, 200421 yr comment_66948 I am in the process of building a turbo engine with an F54 block and a P90 head. After searching/reading many good pages of information on this site, my game plan is to have 300RWH. I have talked with Rebello Racing and Sunbelt Performance about doing the headwork. I'm sure that both shops can do a real good job but both are very expensive. Can anyone recommend other shops that I could talk with that do good work and might be less expensive? I live in South Carolina and I would like to use a shop in the Southeast. Thanks for any light you can shed on the subject. .....mayolives (mayolives@aol.com) Link to comment https://www.classiczcars.com/forums/topic/10034-machine-shop-question/ Share on other sites More sharing options...
February 3, 200421 yr comment_66949 I have had excellent experience with DV Engines in your part of the country. Check out www.dvengines.com. If your interested ask for Doug Syer: he has ported numerous heads for me over the years including an N42 and a P90. The work is top shelf :classic:- but it may also be expensive. Link to comment https://www.classiczcars.com/forums/topic/10034-machine-shop-question/#findComment-66949 Share on other sites More sharing options...
February 3, 200421 yr comment_66952 I don't think anyone has done as much development with the L6 as Sunbelt has, so I'd recommend them. Then again, turbo'd you should be able to make 300rwhp with a stock cylinder head. Link to comment https://www.classiczcars.com/forums/topic/10034-machine-shop-question/#findComment-66952 Share on other sites More sharing options...
February 3, 200421 yr comment_66974 I live in Savannah, Ga. and I have used Motor Supply Machine Shop, ask for Tom Strouss. He is quite good. 912 232 4186 Link to comment https://www.classiczcars.com/forums/topic/10034-machine-shop-question/#findComment-66974 Share on other sites More sharing options...
February 3, 200421 yr comment_66997 An excellent shop in Clearwater Florida is Dwan's Automotive Machine, Inc., 727-573-0944. They know Zcars and can do it all. CK-10 Honing, Align Honing, Balancing, Head Service, Crankshaft Grinding and Dyno Service. Ask for Dwan Brock. "We Know High Performance & Economy". That is their motto. I was very pleased with the service and the turn-a-round time. Link to comment https://www.classiczcars.com/forums/topic/10034-machine-shop-question/#findComment-66997 Share on other sites More sharing options...
Create an account or sign in to comment