Hi all ..just hoping someone could give me some info

I am about to pick-up a 76 280 z I bought and the owner says the injectors are shot and that is all that is wrong. What would be the first test to determine what is wrong with these injectors? I am a carb guy and am not too sure how to work on injectors.

Thanks .. Bruce

Ohm out the solenoid of the injector with a DVOM or A very good cheap(?) Ohm meter. compare to factory specs. Grap an injector and a 9 volt battery. Connect one side of the battery to one injector terminal. And while holding the injector connector the other side. You should feel a click. Pull them out and have them flow tested. Very expensive. That's the three quick ways I can think of off the top of my head. A 6 injectors don't just go bad a once. It's proably something else. Unless there is a factory recall for bad parts like the Z31 injectors. Toasty! :devious: