Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

Very rare 240Z emblem


kats

Recommended Posts

Hi Mike,

I don't understand. Can you clarify what you want me to clarify?

The emblems on the rear spoiler of my ZG are correct. A 'Fairlady' emblem ( no 'Z' integral ) and a '240Z' emblem.

Sorry, I should have been more specific and didn't mean to imply that something wasn't correct. I was really more interested in the overall configuration. Were the two separate emblems used this way only on the spoiler or were there models with this configuration on the hatch itself? I supposed I answered my own question if this is specific to the ZG assuming that the rear spoiler was always present.

Link to comment
Share on other sites

Ah, OK I see what you mean.

Well, don't forget that the ZG was supplied without the spoiler in most cases, as were most of the Japanese models in fact.

The spoilers were often specified as catalogue 'Option' parts, and these were fitted by dealers. When the dealers installed the spoilers, they had to drill the holes to mount them - hence the inconsistency in mounting position that you can see.

It seems that the spoilers took a while to catch on in Japan, and many cars got them a good while after leaving the showroom.

Here's a couple more illustrative pics from official Nissan documentation:

post-2116-14150794906902_thumb.jpg

post-2116-14150794907244_thumb.jpg

Link to comment
Share on other sites

HS30-H, Sorry to kick into this thread but Alan I tried to PM you but your message box is full. I am coming up to London just after Easter and I would love to a see a real ZG in the flesh.Cheers

Hi NZeder,

Sorry about my PM inbox. I've just been there and cleared it out a bit. I'll send you a PM straight away.

Of course you would be most welcome to come and see my ZG ( you can see a half-built 432R replica and some boxes full of junk too :classic: ). Hopefully the weather will be a bit better by that time. I'll have to check dates and see if there are any interesting car-related events worth visiting while you are in the UK.

Cheers,

Alan T.

Link to comment
Share on other sites

  • 2 months later...

Sorry to be bringing a thread from the past up, but I spent a lot of time just reading all this. GREAT STUFF ALL YOU GUYS FROM WAY BACK WHEN.

I came upon this thread when searching for part numbers and found a few.

I am looking for the part numbers for the Fairlady Rear Deck Emblem without the Z and the fairlady fender emblems.

I have a Series-1 Z ..HLS30-11063 and am looking for the part numbers for the pillar emblems that match my car.

So far I have found only these...

90807-E4602 Deck Emblem "240Z"

90806-E4601 Deck Emblem "Datsun"

Link to comment
Share on other sites

Welcome to the club and glad you enjoy our topics! I have one of the Z-less Fairlady emblems and they aren't easy to find. Best of luck. I can help you with your pillar emblem questions though. There are several varieties and I'll briefly discuss each.

76807 / 76808-E4600 - up to 1/70 - probably either solid cast or hollow cast metal and the Z is chromed to match the numerals. There are two different chromed Z castings.

76807 / 76808-E4601 - from 2/70 to 12/70 - probably the hollow cast metal white painted Z. The Z is recessed in the casting and back painted white. This casting is different from E4600.

76807 / 76808-E4602 - up to 12/70 replaces 4601 - probably the plastic version of 4601

76807 / 76808-E8200 - from 1/71 - probably the round vented emblem.

Hope this helps. Let me know if you find a solid cast chrome Z.

Link to comment
Share on other sites

Hey buddy, thanks for the input, I was able to track down E4601 and E8200 on both sides. Can't seem to find the original solid Z cast ones yet but if I get a hold of one on my search, I will definately let you know.

One question that you've probably been asked a million times. You own both of thos 00026/00027? That's freakin cooler than ***t!

Link to comment
Share on other sites

Yep! 26th has been with me for twenty years and is currently completely apart and her body shell is being dipped / derusted. I found 27th on eBay last summer and she is rusting comfortably in storage while I restore 26th.

They are both racing green with butterscotch interiors. Both will eventually be restored to "pretty damned original" condition. 26th is scheduled to be enhanced with Nissan / Datsun optional and period correct parts. 27th will go dead stock.

26th went to the dipping "spa" last November and she is still there. She was supposed to be done in March but there has been a hurricane-or-two delay and I expect her back 100% rust free / bare metal very soon.

post-4148-14150795249557_thumb.jpg

post-4148-14150795249744_thumb.jpg

  • Like 1
Link to comment
Share on other sites

..........26th went to the dipping "spa" last November and she is still there. She was supposed to be done in March but there has been a hurricane-or-two delay and I expect her back 100% rust free / bare metal very soon.

Isn't hurricane season just around the corner (again)?

Link to comment
Share on other sites

Yep! 26th has been with me for twenty years and is currently completely apart and her body shell is being dipped / derusted. I found 27th on eBay last summer and she is rusting comfortably in storage while I restore 26th.

They are both racing green with butterscotch interiors. Both will eventually be restored to "pretty damned original" condition. 26th is scheduled to be enhanced with Nissan / Datsun optional and period correct parts. 27th will go dead stock.

26th went to the dipping "spa" last November and she is still there. She was supposed to be done in March but there has been a hurricane-or-two delay and I expect her back 100% rust free / bare metal very soon.

That's a pretty frikkin cool story.

Link to comment
Share on other sites

YEP! June through September as I recall.

I used to live in Orlando, where there were hurricanes, then I used to live in Austin (Pflugerville actually) and there used to be tornado watches...now I live in California where there are Earthquakes... go figure.

BTW, Anyone have any information about the deck lid vents on the Series-1 or P/N's for that matter?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.