FS: ca18bluebird, ca20bluebird, s13 parts. z32 parts

[Murph]

FS: Unfinished CA18DET -> Bluebird TRX Project

Due to other commitments the owners of the project are having to sell.

The CA18DET and the s13 gearbox are currently installed in a SIII bluebird TRX. This shell is a bit on rough side but is still useable with some work.

Things that still need doing:

•Wiring

•Install new fuel system (VL turbo pump and surge tank supplied)

•New tail shaft (just need to source an auto datto 180b unit....they fit)

•Brakes may need upgrading for engineering...although I am not certain on that.

•Reinstall interior

There's plenty more to tell, so if your interested give me a yell and I'll get you the full details on it all. Lot's of s13 parts available too.

We're looking for around the $2000 mark but are negotiable.

The car is located in Townsville, North Queensland. Contact me via PM or email me at datto-zed at performanceforums.com.

http://users.bigpond.net.au/oceanz/z/redbird1.jpg

http://users.bigpond.net.au/oceanz/z/redbird2.jpg

[Murph]

FS: SII Bluebird TRX with SIII engine

This was bought a year or so ago as a potential project base, but the project is being sold off due to the owners having new commitments. At the time it contained a turbocharged EFI L20B, but that's been sold off and it now has the CA20 from the SIII bluebird.

Anyhow, it's got some rust in the body, but nothing terminal. Interior is still in good nick. Oh, has a sun roof and twin thermofans too. There's some minor electrical wiring to be done yet and it doesn't have an exhaust. I think they might have one sitting around though. 150000km on the motor.

It's being sold unreg and no RWC. AFAIK it's complete and running. If your interested I'll obtain any other details for you.

$800 negotiable.

The car is located in Townsville, North Queensland. Contact me via PM or email me at datto-zed at performanceforums.com.

http://users.bigpond.net.au/oceanz/z/whitebird1.jpg

http://users.bigpond.net.au/oceanz/z/whitebird2.jpg

http://users.bigpond.net.au/oceanz/z/whitebird3.jpg

http://users.bigpond.net.au/oceanz/z/whitebird4.jpg

[Murph]

s13 parts for sale (and a few others)

All parts from our s13 silvia front cut are being sold of as the project has had to be abandoned due to other commitments. These are the main bits that come to mind, although we should have pretty much all other parts that would be in a front cut around somewhere.

•CA18DET + Gear box + wiring loom + ecu

•Radiator

•Condensor

•Evaporator

•Aircon blower motor

•Climate control unit

•Compressor

•Ignition wiring loom

•Brake master cylinder

•Clutch master cylinder

•ABS actuator

•Steering rack

Also:

•VL Turbo fuel pump.

•Surge tank

•3 x T2's of unknown origin

•RB20 turbo, perfect nick, never boosted

•VG30DETT

•Any other Z32 parts

If your interested in any part....make an offer.

The parts are all located in Townsville, North Queensland. Contact me via PM or email me at datto-zed at performanceforums.com.