Rear Quarter seam

[mriz]

I gave up trying to salvage the paint because of too many small bubbles in paint ect. ect. While stripping the roof I noticed the crack in the paint at the seam. They filled it with bondo along with 2 coats primer followed by more primer and paint. I figured too much to paint over anyway. But how should I fill the seam ( which looks to be deeper and wider than it should) so the new paint does not crack? Thanks for all of your help during this project.

Jim M.

[Ed]

Are you talking about the seam that is above the 1/4 window?

[mriz]

Yes , thats the one. Sorry I was not more specific on the post.

[Mr Camouflage]

Weld it up. It's originally a lead filled seam, but over time the lead cracks and cracks the paint also. You could re lead fill it, but it will crack again over time.