Wheel Stud Pattern Adapters

[Razor]

Anyone knows where I can get adapters?

I want to have 4 x 114.3mm PCD to 4 x 110mm PCD

or

Nissan Pattern to Mazda pattern

as I saw this nice looking wheels but its got mazda stud pattern

so wondering if I can get an adaptor

is it also safe to have these?

i know the wheels will come out more as well as the centre of the weight

the car is FOR STREET USE only

thanks in advance

[1975yellowBSPZ]

http://www.modern-motorsports.com/catalog/product_info.php?cPath=25_38&products_id=6&PHPSESSID=beb1284c744af73617f6f020ec4f68d7

[Razor]

Performance Wheel quoted US$388.50 for four 1" adapters including shipping it to australia

Modern Motorsports quote US$360 + US$60 to send it to australia

thats just for the adpater/spacers

damn.... thats expensive

if I buy a new set of chrome 15 x 8 IMCA/WISSOTA D-HOLE WHEEL it will cost US$492 thats like around US$100 more than the spacers alone!

hmmmm

[240ZX]

RAZOR,

Don't feel alone with your thoughts about wheel spacer cost!!! I felt the same way when I researched wheel spacers. However, I decided to build my own since I have access to the necessary tools and the experience to fab them. Even at that, the raw material (6061 T3) cost me about $90.00 (U.S.) from a surplus outlet. Anyway, if you have a mate who has the tools and can build them for you, do it.

[Razor]

the bad news is that I dont know anyone who can do it for me free or cheap

and i wouldnt do it myself as I want to leave that field to the professional as they got experience in doing those kinda things and if I make a slight mistake its my car and my life thats going to pay for that.

Now I have to decide should I get the chrome rims or the spacer as I found some mags which looks really mad but for extra AU$600

[zed240au]

better to get wheels to suit the datsun stud pattern than muck around with adaptors

You do know that mitsubi toyota 4 stud mags fit datsun and later mazda re 82 onwards so you dont have to limit it your self to second hand datsun mags

Must sy i had the opposite problem with my rx4 couldnt get any 15" rims cheap to rally so we drilled the back axles to datsun stud pattern and put datsun hubs on the front

Thats probaly the best and cheapest way to change stud pattern drill and stud rear stub axles and fit front hubs to datsun hubs from car that suits the wheels but it is a lot of mucking around

Mick