Hose Problems

[ALT_255]

is there a specal trick to getting off the rubber hose that goes from the hardline to the slave cylinder? i allready ripped it so now i have to replace it. but i cant get the top off because the bracket is bent and i cant turn the hose

driving me crazy...:stupid:

[59ghia]

I believe, as in the brake lines, the hose part is held in place by a clip, and only the hard line should turn. after removing the hard line there should be a slip-fit clip, remove that, then push the rubber hose up and out. You should notice some indents where the hose/ metal part slides into...

Good luck,

Dave