83 280ZX B.O.V. help

[Ja280ZXT]

I'm new to Z car's and dont have a FSM for my 280, just bout it about 3 days ago. Obviously turbo I need help on how exactly i install a blowoff on my 280ZX, what bov i should purchase and which vac nipple do i need too connect it to

thank you

[datto_240z]

I dont think you'll find much help here. The site is aimed at earlyer Zs. Mainly 240z/260z/280z. And there are a couple of members are... lets say... ZX haters:classic:

Someone might help you.

Cheer'z'

Chris

[ZmeFly]

Then you really wouldnt need one as it has a recirculating type bov from the factory.

Until you start adding more power and boost to the car I wouldnt worry about it yet.

The biggest bang for the buck is a 3 inch mandrel bent exhaust from the turbo back

Nets you 20 hp

[S30ZT]

I don't think it has a BOV from the factory but I think you can hold off on it until you swap out the J-pipe with a intercooler. Then you can plumb the BOV anywhere before the throttle body and tee off any vacuum line on the intake manifold. If you really wanted to, you could figure out a way to mount one on the J-pipe but you have to recirculate it back to the intake or your car will run rich between shifts and will stall.

[ZmeFly]

IE like GReddy, HKS or the like. It is a recirculatory device with vents through your IAC into the 4th intake runner.

[Ja280ZXT]

alright thanks for the help guys