MSA rear swaybar for a 10/71 240z...Question

[dogma420]

Howdy guys, just wondering if anyone had bought a set of MSA sway bars for the 2nd gen 240z and if so, does the rear sway bar mount to the suspension....I don't want to buy a set that makes me drill any holes (er rust) in the floorpan. MSA people are usually dolts on the phone, and will say whatever....

....so thanks for an answer in advance, and Z u L8r!

[Bambikiller240]

MSA's Sway Bar Set DOES rquire drilling of holes in the floor pan for the rear bar.

Check into Suspension Techniques for a bar that DOES NOT require drilling. (well, it did not require drilling in the ZTherapy Suspension Video anyway)

[texasz]

Here's a link to a couple threads I started on this very topic and there's a lot of good information in them. http://www.classiczcars.com/forums/search.php?s=&action=showresults&searchid=137998&sortby=&sortorder=

To find them all I did was use the search feature at the bottom of the forum index page. (lame attempt at pointing out the search feature)

[Bambikiller240]

FYI

In the previous threads, Ground Control was suggested as a source for suspension mounted rear sway bars, HOWEVER, they no longer stock/sell early Z car suspension parts.

[abas]

I attempted to get some information into this topic recently.

It appears that suspension techniques sway bar kit part no 52095 includes one of the 'non-drilling' 3/4in rear sway bars.

There is also a nismo 'non drilling' 7/8in rear sway bar available. But it is $200 on its own. If I can find the part number I will post it here.

regards

Andrew

[Fentin_Fury]

I just mounted mine - no drilling! New hanger plates for m bar though - must remove diff.

Link:http://www.racerwheel.com/st-52095.html

Suspension Techniques Sway Bar Kit (Front 1" & Rear 3/4") - 240Z 70-73

Suspension - Sway Bars - NISSAN - 240Z

Manufacturer: Suspension Techniques

Suspension Techniques Sway Bar Kit (Front 1" & Rear 3/4") - 240Z 70-73

Avail: Ship in 1-2 Business Days

ST-52095

Quentin