POR-15 Tip

I just spent a few hours doing the preparation work for using the POR15 floorpan restoration kit. I did the marine clean and rinsed. It seemed weird running a garden hose on the inside my car. I got most of the water out with a rag and let the closed car sit in the sun for an hour or so. I then did the metal ready step and let it properly stay wet for 30 minutes or so before again rinsing thoroughly.

I started to dry it out the same way (POR15 recommends using a hair dryer) and suddenly thought of the wet-dry vacuum I'd been using to get the loose debris out. It gets the water out quickly and even pulls it out of the gaps between the seat support and the floorpan.