glavash Posted June 2, 2004 Share #1 Posted June 2, 2004 I have a '75 280z with A/C. I can't control the fan speed because the plastic wheel that is attached to the switch is broken.I need the round plastic assembly that gets rotated by the teeth of the blower speed control lever. Hopefully that is specific enough.While I'm at it, I could use a dome light as well.Thanks,George Link to comment Share on other sites More sharing options...
sblake01 Posted June 2, 2004 Share #2 Posted June 2, 2004 I had the same thought on my 78 when the plastic lever that controls opening and closing of the vent broke on mine. Much easier to change out the whole control unit since you have to remove it anyway. Link to comment Share on other sites More sharing options...
glavash Posted June 2, 2004 Author Share #3 Posted June 2, 2004 I got my hand back there enough to get the broken piece off. I can get a wrench on the nut from the front such that I could make the swap without taking out the whole unit.So if I can get just the piece I need, I'll be good to go.George Link to comment Share on other sites More sharing options...
glavash Posted June 3, 2004 Author Share #4 Posted June 3, 2004 I have found a source for both my parts, thanks.George Link to comment Share on other sites More sharing options...
zKars
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now