TomoHawk Posted August 8, 2004 Share #1 Posted August 8, 2004 When the sun hits the windshield at a low angle, it looks like my car was driven through storms of rocks & sand, with all the tiny little pits & small scratches. Is there a way to repair the glass so it's nice & clear again?thxe Link to comment Share on other sites More sharing options...
MikeW Posted August 8, 2004 Share #2 Posted August 8, 2004 You can polish glass to remove small imperfections and scratches but it's a lot of work if you need to do the whole windshield. I used <A HRef=http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=2024&itemType=PRODUCT&iProductID=2024>this kit</a> from Eastwood to remove some fairly deep scratches from when a previous owner ran the wipers with no blades. Keep in mind that you can probably get a new windshield installed for around $250 so when you add up the cost of the kit and a polisher to use it with and a whole bunch of hours of your time you have to make a decision. Link to comment Share on other sites More sharing options...
TomoHawk Posted August 8, 2004 Author Share #3 Posted August 8, 2004 You can't see anything from the outside. Only when you look from the inside with the sun low. Glare is also a problem with the sun low. Link to comment Share on other sites More sharing options...
HKSZ Posted August 9, 2004 Share #4 Posted August 9, 2004 I got told this trick for passing roadworthys, spray matt black primer on the windscreen then scrape off with a razor blade. Might just pass for what you want. Link to comment Share on other sites More sharing options...
TomoHawk Posted August 9, 2004 Author Share #5 Posted August 9, 2004 Black??I was thinking of using some polyurethane clear. or even some of that eyelasses scratch fixer stuff. Link to comment Share on other sites More sharing options...
TomoHawk Posted August 9, 2004 Author Share #6 Posted August 9, 2004 Black??I was thinking of using some polyurethane clear. or even some of that eyelasses scratch fixer stuff.thx, mate Link to comment Share on other sites More sharing options...
mriz Posted August 16, 2004 Share #7 Posted August 16, 2004 If you do go with a polishing compound and wheel be real careful of heat build up. Laminated glass is not too tolerant of heat and pressure on a small area. I did try it on my 82ZX when I worked at a glass shop. the pits are usually too deep to polish out, changed out windshield in the end. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now