Rob72 Posted February 5, 2000 Share #1 Posted February 5, 2000 Getting ready to drop my automatic out, and need to get the shifter out. I removed the console, and the four bolts holding the brass plate down, with the shifter down in the valley. Of course it won't drop out, I think there maybe a horizontal bolt/pin of some type that might be accessbile from underneath, but I couldn't reach it. Am I on the right road here? If it is a bolt head (covered in hard to access grease/grime), does this thread out?Thanks...------------------Rob725-spd/4.11/SU's Link to comment Share on other sites More sharing options...
Rob72 Posted February 8, 2000 Author Share #2 Posted February 8, 2000 I found the nut at the end of the horizontal linkage could be removed and the vertical linkage was withdrawn up through the console. Rob72 Link to comment Share on other sites More sharing options...
Mike Posted February 8, 2000 Share #3 Posted February 8, 2000 Sorry, I don't know automatics. Otherwise I might have been of some help.[m] Link to comment Share on other sites More sharing options...
Rob72 Posted February 9, 2000 Author Share #4 Posted February 9, 2000 You're lucky. As the torque converter fluid leaked out all over my new jack, I said, "manual trannies forever!". Link to comment Share on other sites More sharing options...
inline6
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now