Jump to content
We Need Your Help! ×

IGNORED

East Coast Z Car Center


alordzot

Recommended Posts

alordzot-

Last time I visited was about 6 weeks ago.

Always call before visiting, to make sure he's open, especially on Saturdays.

Has half dozen or so conex boxes in the back filled with parts. Tell him what you need; he may have it already pulled.

PS - stay away from the white 260 on the right hand side, mid-way to the back. I still need to get the vinyl trim out of there. LOL :nervous:

Guess I know where I'll be on Saturday.

We sometimes differ on price, but 'supply and demand' overrules every time.

His email is ZPartsMan@aol.com, he usually directs you to call him anyways.

PM me if you need directions.

Wayne

Link to comment
Share on other sites

Thanks, I think I will make a trip down there from the DC area one saturday, I need to get the linkage for a set of round tops that did not come with the carbs when I got them from EBAY. If that fails I will need to order it from the carb rebuilder kings ZTherapy.

You sure that I can't get that part from the white 260. Na wrong year and type.

Thanks again for the input

Link to comment
Share on other sites

alordzot,

You may want to check with Dave over at Datsun Dynamics as they have alot of parts garnered over the years. At least it's not as far to drive?

I'll probably be heading down to Tidewater Z Service in Poquoson,Va. in the next few weeks to check in on the floor/frame rail project on my '78 280Z. They may also be a good source for the parts you're looking for as well.

The links are here:

http://yp.yahoo.com/py/ypMap.py?Pyt=Typ&tuid=2555320&ck=1107117275&tab=B2C&tcat=7844597&city=Norfolk&state=VA&uzip=23510&country=us&msa=5720&cs=4&ed=tL1S8a1o2TzdXtqutonoiMQYHxdFgfQQRszzBAOm7fn4&stat=:pos:0:regular:regT:1:fbT:0

and Datsun Dynamics is here:

http://yp.yahoo.com/py/ypMap.py?Pyt=Typ&tuid=2419510&ck=3853797839&tab=B2C&tcat=7844597&city=Waldorf&state=MD&zip=20602&uzip=20602&country=us&msa=8840&cs=5&ed=pTlEua1o2TyRDSD76gGfcFtv6frjEWJMD1lvE0JZmz1h&stat=:pos:0:regular:regT:1:fbT:0

Link to comment
Share on other sites

  • 4 weeks later...
Thanks, I think I will make a trip down there from the DC area one saturday, I need to get the linkage for a set of round tops that did not come with the carbs when I got them from EBAY.

So what did you think? Worth the ride?

I been there several times and wasn`t all that impressed.

He wants to much for his stuff.

If you can get into the storage cantainers at the back of his lot, thats were he has the "good stuff".

What carb linkage are you after? I might be able to help.

Doug

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.