Hi,

I have a slighly used (very good condition) set of Kameari Racing Pistons for sale (on behalf of a friend so im gaugeing some expressions of interest) 89mm with a 29mm pins Comes with rings circlips and wristpins. Best suited for L28s.

looking at around $800 AU.....$650 USD

email me @ kingoffoxes@hotmail.com or pm me.

might be interested gotta check that it would work with my stroker. Seems a little expensive for second hand though.

I'll let you know.

they are over $1000 new in Japan, and as i said, hardly used at all. My mate could be flexible on price. But i cant speak for him

might be interested gotta check that it would work with my stroker.

Gav,

Just a heads-up:

If you want to use these particular pistons, you will need to consider your Connecting Rod length.

The 89mm KAMEARI pistons with the 29mm pin height are designed for use with a 'long' rod. If you use them with the stock L28 crank stroke, then you ideally need to use 139.5mm centre-to-centre length rods. If you use them with the LD28 crank stroke, then you ideally need 138mm centre-to-centre length rods.

They are good quality forged pistons with machined cutouts for valve clearance ( they are actually manufactured by JUN for Kameari ) and they retailed at 89,250 Yen per set the last time I looked. I'd want to *at least* put new rings on them if I was going to use them.

Cheers,

Alan T.