rb26 turnkey setup

[stony]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33615&item=7939412803&rd=1

Its my old setup. I have a new motor going in now :>

[240ZX]

How many miles are logged on the engine, what sort of service did it receive, and how hard was it used? Do you have a compression test readout?

Very interested!

[stony]

It had 35000K on it when I personally pulled it out. I have driven it for 4 years now only in the summer in Alaska (3 months) and put maybe 1000-1500 miles on it. It has only seen synthetic oils. Most of the miles put on it where to and from the track. It was tuned on a dyno and ran 11.138 at 127 MPH. it dynoed over 500 crank HP and 392 RWHP. It has sat for about a year now as once I got it tuned and started hooking up at the track the rear-end kept breaking on me. I can get a compression test done but I don’t have one at this point. It ran great before I pulled it so I didn’t see a point.

[stony]

it made its HP at 15 PSI. there is no way it would have made 392RWHP with stock turbos at 15 PSI if it had low compression on any cylinder.