Part # for a grommet?

[kenz240z]

Bob, I got the firewall grommet for the windshield wiper motor from Banzai Motorworks (http://www.zzxdatsun.com/). Click on catalog, then click on rubber. Part number: C-05 Reproduction wiper motor harness grommet 1970-1978. It's a great reproduction part. They have several other great restoration items for the early Z cars.

[Jackhammer]

Yes, I still have a few left. No, the opening on a 71 is smaller. No, this grommet won't work anywhere else. Bonzai has the hatch floor grommets your looking for. (zzxdatsun.com)

Ed..... if it fits an early 9/73 260Z I would be interested in one. Do you know if it works?

Thanks,

Jack

[Ed]

Ed..... if it fits an early 9/73 260Z I would be interested in one. Do you know if it works?

Thanks,

Jack

To confirm if it will work, measure the size of the hole in your firewall. 73 & early 74 have a 2 1/2" hole. Earlier Z's are smaller.

[Jackhammer]

To confirm if it will work, measure the size of the hole in your firewall. 73 & early 74 have a 2 1/2" hole. Earlier Z's are smaller.

Confirmed....it is a 2 1/2" hole.

[7T1240]

Bob, I got the firewall grommet for the windshield wiper motor from Banzai Motorworks (http://www.zzxdatsun.com/). Click on catalog, then click on rubber. Part number: C-05 Reproduction wiper motor harness grommet 1970-1978. It's a great reproduction part. They have several other great restoration items for the early Z cars.

Bob M.,

Attached please find a photo of the Banzai Part number C-05 previously mentioned by kenz240z.

Gary S.