Saw the pics of the bloke who did an Sr20 conversion into a Zed, looked really awesome,

If this bloke is still around i would love to pick your brain about how you got it in and what the car was like to drive after the conversion??? and how you made the engine mounts???

www.sr240z.com

Saw that site, but its not the guy im after.........pretty sure hes in Australia,

The first one had weird engine mounts that came off right at the front of the block and used the stock crossmember mounting points, looked as if it didnt use the stock Sr20 engine mounts, but custom ones that were heaps further forward along the block,

The sump was almost on top of the front crossmember and looked to be a right-hand drive car,

The one from sr240z.com cut off the original Z crossmember engine mounts and has welded supports on the chassis rail, this one is a left-hand drive car,

Wow i'd have though that would be kinda underpowered wouldn't it? Very interesting idea...

Had a guy who was around the other night tell me i should put a triple rotor 20b in my zed, cause he said that's how they should have been..... DATSUN NOT MAZDA 260Z! Though once again an interesting prospect.

Mick: Well coming from a 2.4/2.6L 6 cyl to a 2L 4 cyl, my initial thought is also that it's a bit small.... However, keep in mind that the zed is a few hundered kg lighter than the car the SR20 is coming from.

That would be Nixcars

His photo gallery:

http://www.classiczcars.com/photopost/showgallery.php?cat=500&ppuser=3241

Heres his member page so you can send him a message:

http://www.classiczcars.com/forums/member.php?userid=3241

Anyone see the videos at sr240z.com? See the 260z turbo hit the wall in the tunnel? ouch that's would have hurt .

Kinda feel for the guy and can't imagine how i would feel if it were my baby .

It's a good lesson not to get over excited going on a group cruise and only push yourself where your comftable. They went way too fast into the tunnel and obviously were unaware of what lay ahead.

Be careful guys!

a 4 banger in a Zed???? boooooo!!!!

hahahah oh man that look nasty!!! you can see the 350Z loop it in the tunnel then BANG!!! that is some serious damage to S30. Only thing i dont get is a black 350 goes in and a silver one comes out???

hey at least they got it on camera, that'll be a good show to watch down the line.

Dam it looks worse on video, been there done that, I know how he feels all happens so quickly.

My wreck http://www.mazdarotary.net/ndsoctassie0501.htm

What happens when you get a flat and the tyre rolls off the rim. Passenger, not a good feeling

Stuffed both frame rails, A piller now 1/2inch further back, passenger floor bent back to where the seat bolts in, and the rest of it

Dale

holy crap dale thats some nasty stuff,

your zed looks like a pancake! good thing it didnt roll over. i had a wheel come completely of the hub last year at 70kmh. not too much damage though, another story covered somewhere else.

hey i think we should start an i smashed my zed thread.

Thanks Mr Camouflage,

Nixcars - really interested to know how you made up your engine mounts and gearbox crossmember