Stock Injector Specs

[TomoHawk]

Can somebody give me the specs on the stock injector for a 280Z? I need the OEM Bosch part #, but the Flow rate, etc. would be good to have too, so I can select al alternative, if I need to.

thx

[240ZX]

PEP BOY'S :stupid:

[TomoHawk]

Your head must hurt. Try a wet noodle next time.

Pep Boys sucks and I would never buy anything from a store that is total bling. Besides, there isn't one within 100 miles of me.

AutoZone had some information, but none of the 'OEM numbers' listed matched what was on the injector, which were hard to read in the first place.

[240ZX]

You know TomoHawk, you for once are correct about something! Yes, my head hurts every time I read one of your posts!!!

P.S. G E T A L I F E

[TomoHawk]

Apparently, people in your area have a weird idea of "life." Do you have any useful information relative to the original question?

thx

[240ZX]

[webdawg1]

The following word file will probably help you out some. Have also compiled several web links if you want to have some of your old and nasty looking fuel injectors "Refurbished/Rebuilt" at one of the places listed. If interested PM me and I'll send them to you.

webdawg1

Fuel Injector Info.doc

[TomoHawk]

Thanks webdawg1

That photo seems familiar, but I don't remember where I saw it before.

My injectors don't have the #1 in the pic (Injector lower rubber insulator). Instead, a plastic 'cap.' I will dig them out maybe Saturday, and I can post a pic if you want to see one; assuming I get one out intact.

thx.

[justaZcarguy]

Tomohawk,

When I had my '78 280 I got the specs from a place in Portland called Bap Geon in Delta Park I believe. By the way that is Oregon...

If you want the contact number I can grab it tomorrow.

Lemme know.

Bri

[sblake01]

A little off topic trivia: BAP-GEON=British Auto Parts-GEorge Owen Automotive as explained to me by a friend of mine that worked at the one in West Covina, CA a few years ago. But back to the original question, would MSA or VB have the info you seek?

[kcdc]

Webdawg1,

Thanks for the attachment; great info.

The following word file will probably help you out some. Have also compiled several web links if you want to have some of your old and nasty looking fuel injectors "Refurbished/Rebuilt" at one of the places listed. If interested PM me and I'll send them to you.

webdawg1

[justaZcarguy]

Thanks Blake I have always wondered about that....