Timing cover gasket set

[Ed]

I recently received a timing cover gasket set from Victoria British, part # 53-702 manufactured by ROL gaskets (hecho in Mexico). While I'm fairly pleased with the overall set there is one problem. On the gasket that goes on the left side of the timing cover (if your standing in front of the car looking at the front of the engine) there is a hole in the gasket for one of the oil gallery's the one I'm talking about is the one that goes from the pump to the filter. This hole is cut in the wrong place it is off by about 1/4 of an inch or 2 mm. Now this will probably not affect engine performance too much but it will restrict oil flow. I took a sharp knife and cut the gasket to fit.