The story begins here, in Gothenburg...

This is my 1971 240z when I picked it up after arriving in Gothenburg from

Chicago. E"verything" looked "well" - and met my expectations from the pics

in the ebay auction. However - the "rust free" turned out to be a big hoax...

Anyway, after getting it up on the trailer and taking it home to Stockholm

it was unloaded at a friends company - called Speedworks where I assume most of the

mechanical mischief will take place once the car's been restored. The engine

was fired up (or rather jump-started since the ignition wires had been yanked

from it's original place) - picure below.

Vidcap-picture of the car at Speedworks.

The engine wasn't running like it was new, but at least it was running. Not

that it mattered much anyway - the car wouldn't have made it through an

inspection by the swedish "DMV" anyway. As I soon learned, the floor pans

were replaced by a hopeless heap of fiberglass, riveted and bolted pieces of

metal. Click the links below for images of the so called floor...

http://gallery.voodoo-people.com/albums/240z-projekt-Hugo/b12.jpg

http://gallery.voodoo-people.com/albums/240z-projekt-Hugo/b13.jpg

http://gallery.voodoo-people.com/albums/240z-projekt-Hugo/b14.jpg

http://gallery.voodoo-people.com/albums/album185/01_G.jpg

I continued to strip the car of... everything. That was the plan from the start

pretty much, so a "little rust" wouldn't discourage me. When I removed the

dashcap - I was surprised - I have never seen a more messed up dash than this!

Anyway - I got in contact with a company called SCE - Swedish Composite

Engineering - and they will be helping out with molding/making a lot on this

car from carbon fibre. So far the planned parts incluce: The hood, cowl plate,

service hatches, front fenders, doors, rear hatch, center console, dash and

the tail light plates. Since I don't want to completely "out source" the job I'll

be present during the production of the parts, hopefully learning something

Since the car was all together nasty, I figured having it sand blasted would

be the most reasonable thing to do. Said and done - Doors were sent packing.

http://gallery.voodoo-people.com/albums/dag20/00_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag20/01_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag20/02_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag20/03_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag23/05_G.sized.jpg

I think they came back alright... As did the other small parts I sent every

now and then - including the cowl plate, tail light plates, fenders, etc.

http://gallery.voodoo-people.com/albums/dag30/01_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag30/02_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag30/03_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag30/04_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag30/05_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag31/01_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag31/02_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag31/03_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag31/04_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag31/05_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag31/06_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag31/07_G.sized.jpg

After a while, there wasn't much more to dismount from the car, looking like this:

A rotisserie stand was made by Speedworks, from the blueprints of a friend:

http://gallery.voodoo-people.com/albums/dag28/00_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag28/02_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag28/06_G.sized.jpg

http://gallery.voodoo-people.com/albums/dag28/11_G.sized.jpg

Since some parts weren't feeling to good, I called in the reinforcements,

ordering parts from a company called Meca. Tabco wouldn't even reply

to my e-mails even though I had placed an order. Very poor service IMO.

Pictures of the actual parts are here:

http://gallery.voodoo-people.com/albums/hugo-diverse/delar01.jpg

http://gallery.voodoo-people.com/albums/hugo-diverse/delar02.jpg

http://gallery.voodoo-people.com/albums/hugo-diverse/delar03.jpg

http://gallery.voodoo-people.com/albums/hugo-diverse/delar04.jpg

http://gallery.voodoo-people.com/albums/hugo-diverse/delar05.jpg

http://gallery.voodoo-people.com/albums/hugo-diverse/delar06.jpg

So - that's about it. As of now the car stands knee deep in sand at Allblästring

(the sand blasting company) waiting for me to pick it up, but I'm not going

to be able to during this week. Bugger

More pics:

http://gallery.voodoo-people.com/albums/dag32/01_G.jpg

http://gallery.voodoo-people.com/albums/dag32/03_G.jpg

http://gallery.voodoo-people.com/albums/dag32/04_G.jpg

http://gallery.voodoo-people.com/albums/dag32/05_G.jpg

http://gallery.voodoo-people.com/albums/dag32/06_G.jpg

http://gallery.voodoo-people.com/albums/dag32/07_G.jpg

http://gallery.voodoo-people.com/albums/dag32/08_G.jpg

http://gallery.voodoo-people.com/albums/dag32/09_G.jpg

http://gallery.voodoo-people.com/albums/dag32/10_G.jpg

http://gallery.voodoo-people.com/albums/dag32/11_G.jpg

http://gallery.voodoo-people.com/albums/dag32/12_G.jpg

Parts from ZEDD FINDINGS, yay!

http://gallery.voodoo-people.com/albums/dag32/13_G.jpg

The front frame rails will be replaced, along with a bunch of sheet metal.

I got 4 square meters of 20 gauge sheet metal standing by to fill in all the

gaps. Will probably buy a bunch of 18 gauge as well... When all the rust

has been cut away and replaced with healthy new metal, the car will be

hauled back to sand blasting to blast the welds, etc. The entire car will

be painted with POR-15 silver (I know what Escalon [spelling?] thinks of

it - but I've been told by the resellers of POR-15 Germany that it'll be fine

as long as the surface is rough (go over it with block sanding). I'm being

sponsored by the swedish reseller of POR-15, so I reckon It'll be alright.

To be continued...

Sorry, no new video planned as of now. The next one is probably coming somewhere mid august, or something.

Here are my new seats instead ; )

The nice black Tilton pedals say hello to Hugo... : )

That pedal box is AWESOME!

Are they going to have to come forward at all to allow full depression without hitting the bulkhead, or is that going to be enough room?

Regardless they look GREAT.

I think you should mount them where they are in the pic. You could do heel-to-heel shifting! Heh, heh! What is the ratio of this pedal assy. Looks like it may be 5:1 or more?

That pedal box is AWESOME!

Are they going to have to come forward at all to allow full depression without hitting the bulkhead, or is that going to be enough room?

Regardless they look GREAT.

Thanks! : )

The problem is not the pedals hitting the firewall, but the cylinders.

Hopefully it'll fit.

I think you should mount them where they are in the pic. You could do heel-to-heel shifting! Heh, heh! What is the ratio of this pedal assy. Looks like it may be 5:1 or more?

Good question. I'm not sure : ) Haven't measured ...

Drawings: http://www.tiltonracing.com/pdfs/90.pdf

Assembly: http://www.tiltonracing.com/content.php?page=list2&id=8&m=b

Did you mean heel-toe-shifting? I'm hoping to learn it - and fit it : )

Just for show: Here's a Tilton setup in a (mad) SAAB 9-3 (750+ bhp AWD) ...

BEHOLD! A rollcage in the making! : D

Wow, dude that car is getting better every month too bad I dont have your source of income.

I love you mull. Haha.

Video #16 is out: http://video.google.com/videoplay?docid=8111351628724312740

Medium quality WMV and a high quality divX will follow.

Mull, I've been following your project for a year or so, and, to tell you the truth, every time I watch the videos I have to pick up my jaw from the floor... I just can't imagine myself doing all that, the body looked impossible to be repaired. I'm restoring my Z now, but rust in my car is NOTHING compared to your Z. It almost looked as if it was a machinegun target or something. I'm just glad that there are so many Z's in Sweden, here in Poland there are around 4 or 5 - and it has twice the population of Texas. I'm going to Sweden during the next year's vacations, can I drop by just to touch the car? Please!

And btw: what kind of primer did you use?

And btw: what kind of primer did you use?

The one pictured in the films? Standox epoxy primer.