jmanz6 Posted May 31, 2005 Share #1 Posted May 31, 2005 I am looking for a header flange for a square port (or round port if you have one) head. I am going to make a custom header and want a flange to work from. If you have an old rusted out header you can cut the flange off, I will have a new one made from it as a template. Let me know if you can help...ThanksJason Link to comment Share on other sites More sharing options...
240ZMan Posted June 1, 2005 Share #2 Posted June 1, 2005 I happen to have my square port header off the engine at the moment. I could trace the flange on paper if that would help. Link to comment Share on other sites More sharing options...
e_racer1999 Posted June 1, 2005 Share #3 Posted June 1, 2005 i'm actually in the process of making 1/4" aluminum headplates to convert round to square heads..... i'll let you know on my progress... Link to comment Share on other sites More sharing options...
jmanz6 Posted June 1, 2005 Author Share #4 Posted June 1, 2005 240Zman, If you cold do that I would appreciate it. Can you also figure out where the ports go and draw them in as well. Having only the outline won't be enough... There is a waterjet company nearby, and I was going to have them make a couple flanges for me out of 3/8 stainless. Let me know if anyone else can help me out. ThanksJason Link to comment Share on other sites More sharing options...
First Gen Z Posted June 1, 2005 Share #5 Posted June 1, 2005 You could also use a cast iron manifold for a pattern. Link to comment Share on other sites More sharing options...
jmanz6 Posted June 1, 2005 Author Share #6 Posted June 1, 2005 I could, but then I would have to figure out the ports, If I had a flange, I could just have them make a new one for me with little to no effort on my part. I know someone has an old header they will cut up for me. I am willing to buy it also... Just not too much $$ please. Link to comment Share on other sites More sharing options...
mdbrandy Posted June 1, 2005 Share #7 Posted June 1, 2005 I could, but then I would have to figure out the ports, If I had a flange, I could just have them make a new one for me with little to no effort on my part. I know someone has an old header they will cut up for me. I am willing to buy it also... Just not too much $$ please.I think I still have the headers that I cut off my '70 240Z. If you haven't found anything else, I'll look tonight. I'm taking the car back to stock, and the headers were rusty junk anyway, so if you want the flange, I can cut it off. I wouldn't need any $$ for it, but I'd need you to pay for shipping. Let me know if you're interested and I'll look. Link to comment Share on other sites More sharing options...
jmanz6 Posted June 1, 2005 Author Share #8 Posted June 1, 2005 That would be great. I will gladly pay for shipping. You can figure it to 48328. I have paypal if you take that, or I can get a money order. Let me know if you still have the flange. Thanks, Jason Link to comment Share on other sites More sharing options...
mdbrandy Posted June 1, 2005 Share #9 Posted June 1, 2005 That would be great. I will gladly pay for shipping. You can figure it to 48328. I have paypal if you take that, or I can get a money order. Let me know if you still have the flange. Thanks, JasonI shall look this evening... Link to comment Share on other sites More sharing options...
jmanz6 Posted June 4, 2005 Author Share #10 Posted June 4, 2005 mdbrandy,Did you find the header? Let me know. Thanks Jason Link to comment Share on other sites More sharing options...
mdbrandy Posted June 4, 2005 Share #11 Posted June 4, 2005 mdbrandy,Did you find the header? Let me know. Thanks JasonAh, yes. Sorry. It's sitting out in the garage on the floor under the 240Z which is up on jack stands. So, do you want a pic first or anything, or shall I just sawzall the runners off and box it up? It came off an E31 head. Should be able to accomplish that sometime this weekend. Just finished scuff sanding my rear suspension pieces in prep for an afternoon's painting work. Link to comment Share on other sites More sharing options...
jmanz6 Posted June 4, 2005 Author Share #12 Posted June 4, 2005 You can just cut it and send it. Let me know how much I owe you and I will get it out to you. I really appreciate this. I will make it up to you...Jason Link to comment Share on other sites More sharing options...
inline6
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now