Posted June 4, 200519 yr comment_126357 Hi, i currently own a 1972 datsun 240z with 55k original miles. Restoration is in progress and moving fast, however i just ran into a problem. The car will not rev past 2000 rpms, and when it reaches 2k it sputters and runs terribly. I had just replaced the condenser and thought that i may have swapped the distributor rotar 180* off but i didnt. Any suggestions? it ran fine with the previous condenser Link to comment https://www.classiczcars.com/forums/topic/16158-wont-rev-past-2000/ Share on other sites More sharing options...
June 4, 200519 yr comment_126360 try the previous one and see what happens...not out of the question to have a doa one. Link to comment https://www.classiczcars.com/forums/topic/16158-wont-rev-past-2000/#findComment-126360 Share on other sites More sharing options...
June 4, 200519 yr comment_126363 My brother had a problem that was simular in his 95 5.0 mustang. It would rev to 3k and jump to 5k-6k and make no power. It was discovered that a valve spring was broken and a few others were loose or something like that. Check all the valve tran and see if everything looks good. Link to comment https://www.classiczcars.com/forums/topic/16158-wont-rev-past-2000/#findComment-126363 Share on other sites More sharing options...
June 5, 200519 yr comment_126382 Do you notice the lights dim in the car when you have the problem? I had the almost same problem and it turned out to be a bad alternator (Starving the car of spark). Just a suggestion. Link to comment https://www.classiczcars.com/forums/topic/16158-wont-rev-past-2000/#findComment-126382 Share on other sites More sharing options...
June 5, 200519 yr Author comment_126392 nah the car doesnt dim or anything like that. i think it must have sumthin to do with the timing. I checked the valves and they are mint. I should probably swap the old condesner back in. By the way the new condenser is smaller than my old one, could that be a problem or does it not really matter? Thanks for your responses i hope we figure this problem out. Link to comment https://www.classiczcars.com/forums/topic/16158-wont-rev-past-2000/#findComment-126392 Share on other sites More sharing options...
June 5, 200519 yr Author comment_126439 ok, well swappin the old condenser back on didnt do anything, and its still not reving past 2000. Any suggestions? im lost now =( Link to comment https://www.classiczcars.com/forums/topic/16158-wont-rev-past-2000/#findComment-126439 Share on other sites More sharing options...
June 5, 200519 yr comment_126445 i had the same problem but I was running wayy too rich.. so I leaned it out some.. works fine now Link to comment https://www.classiczcars.com/forums/topic/16158-wont-rev-past-2000/#findComment-126445 Share on other sites More sharing options...
June 5, 200519 yr comment_126450 what will it do when it reaches 2K? does it sputter or does it sound like a rev limiter? Link to comment https://www.classiczcars.com/forums/topic/16158-wont-rev-past-2000/#findComment-126450 Share on other sites More sharing options...
June 5, 200519 yr Author comment_126452 problem solved guys, the timing was off and its all right now... thing runs really nice now, thanks for the help guys Link to comment https://www.classiczcars.com/forums/topic/16158-wont-rev-past-2000/#findComment-126452 Share on other sites More sharing options...
June 6, 200519 yr comment_126466 no prob! good job! Link to comment https://www.classiczcars.com/forums/topic/16158-wont-rev-past-2000/#findComment-126466 Share on other sites More sharing options...
June 6, 200519 yr comment_126516 Glad to hear it was an easy fix! now finish it so you can drive it! Link to comment https://www.classiczcars.com/forums/topic/16158-wont-rev-past-2000/#findComment-126516 Share on other sites More sharing options...
June 6, 200519 yr comment_126517 i had a similar problem in my 240z after I rebuilt my distributor i was in a rush and didn't set the timing with the gun and thought "she'll be alright" but it just didn't wanna rev and you could smell the burning smell of detonation . Next day I sorted her out and she drove better than she ever had. FWIW the condensor should say how many uF it's rated at as long as they are the same i don't see a problem. might pay to keep the old one spare in the glove box as you never know. Link to comment https://www.classiczcars.com/forums/topic/16158-wont-rev-past-2000/#findComment-126517 Share on other sites More sharing options...
Create an account or sign in to comment