Jump to content
We Need Your Help! ×

IGNORED

Checking Headlight/Wiper Switch


zamog

Recommended Posts

Dashboard and tailights/parking quit working. I took the shroud off the column to check out the light/wiper control. On top there are 4 soldered wires. 3 show hot when tested. How can I confirm the control is the culprit for tail and dash lights not working?

Thanks

Link to comment
Share on other sites


The lights you described are controlled by a fuse. I believe its the third one up on the right side of the fuse box. I'm speaking from experience on my 78. This may or may not apply to your car depending on the year.

Link to comment
Share on other sites

Go to this page http://www.geocities.com/zgarage2001/z.html and look at the "Z problems". The fusebox is a common site for corrosion. I had one fuse box melt down on me.

My experience was this: I would notice the lights being out. I checked the fuse visually, and it looked fine. I pulled it and checked continuity which failed. I replaced the fuse a couple of more times. One time while the lights were still working, I lifted the cover to see the fuse glowing orange, not the best thing to see in your fusebox. Eventually, the fuse heated up enough to melt the plastic. I replaced the fusebox and haven't had a problem since.

If you want to get fancy, you can get an updated fuse box from MSA for $200. It looks sweet.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.