CoastGuardZ Posted August 12, 2005 Share #1 Posted August 12, 2005 Well, I went to move the Z out of the garage and when I pressed the clutch down it has no pressure. No resistance what so ever. It has plenty of fluid - which looks like it should be changed. It gave no warning, she sat for a few days and now this. Master or slave cylinder is the question? My guess would be slave. Any other ideas?Nate Link to comment Share on other sites More sharing options...
LanceM Posted August 12, 2005 Share #2 Posted August 12, 2005 My guess would be master, bad slave would leak (blowby) from the pressure from the master. Much like brakes, soft or no pedal is a master. Pump the crap out of it and look for low fluid/leaks, if there are none go for a master cylinder. Link to comment Share on other sites More sharing options...
zman525 Posted August 12, 2005 Share #3 Posted August 12, 2005 same thing happened to me... turned out to be the master cylinder... luckily i had a spare! hope this helps Link to comment Share on other sites More sharing options...
jmortensen Posted August 12, 2005 Share #4 Posted August 12, 2005 You can pull the rubber boot back on the master and slave and see which one leaks if you just want to know which it is. Most people replace both at the same time, so if you're going to replace them both then you don't really need to find out which was the culprit. Link to comment Share on other sites More sharing options...
CoastGuardZ Posted August 12, 2005 Author Share #5 Posted August 12, 2005 Thanks fellas, makes sense. I just put it up on jack stands... no leaks that I notice from the top so I'm giving the bottom a shot. Z convention next week and I lose my Z... not good! Might have to next day a part, urgh! Link to comment Share on other sites More sharing options...
Ed Posted August 13, 2005 Share #6 Posted August 13, 2005 Go to your local Advance auto parts. Replace BOTH. And I will see you AND your Z at the convention.Ed Link to comment Share on other sites More sharing options...
CoastGuardZ Posted August 13, 2005 Author Share #7 Posted August 13, 2005 Update...Both on order from Advance... Master will be here tomorrow and slave on monday. Getting ready to replace ball joints in the next few minutes.Nate Link to comment Share on other sites More sharing options...
CoastGuardZ Posted August 13, 2005 Author Share #8 Posted August 13, 2005 Ball joints finished... So I guess I'll just go for a drive, oh wait that's right...NO CLUTCH! AAARRRRGGGGHHHH!!!!!! :pirate: Here's a pic of the ball joints I just removed, I think they're still useable :stupid: Link to comment Share on other sites More sharing options...
inline6
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now