got a 71 240, looking to stuff fatties and still maintain good aero. need either a dealer, or a known fabricator who has done this before.

come on! someone has to know the answer, even if it is "NO!"

The only wide fenders for the older Z's are flares that are added to the existing feders. Some have rolled or cut the arch of the original fenders and then feathered in the A/M flares.

If you want to see a wide selection of body parts check this out:

http://www.showcars-bodyparts.com/

I dont know about their quality or if they are even still available but they have more aftermarket bodyparts then anyone else that I have found.

MSA had some you added either by weld or by fiberglass and so did Arizonia Z car but not sure if they are still around. I have seen fenders with them already install but 99% of them were fiberglass. Steel ones are very rare and very expensive due to labor. The best thing is to try is either yahoo or google , if the above mentioned places don't have. Good luck

Check the classifieds on Hybrid Z, there was a set of the Imsa wide fenders posted.

Also check ZCAR.COM classifieds, and last week there was a set on ebay.

good luck

Try here:

http://classifieds.hybridz.org/showproduct.php?product=1048&limit=&cat=18&page=1&sortby=&sorttime=&way=

I have several styles in my gallery. Try www.ztrix.com and MSA for fiberglass and Victoria British carries some steel flares.

i love the GTO kit but it is a bit spendy, and alters the look of the z into something else. now if i wanted a ferrari "wanna-be" i'd be all over it!

i love the GTO kit but it is a bit spendy, and alters the look of the z into something else. now if i wanted a ferrari "wanna-be" i'd be all over it!

They have more than just the GTOs:

http://www.reactionresearch.com/940z.html

http://www.reactionresearch.com/280yzgallery.html

http://www.reactionresearch.com/subtlez.html

And there is a convertible setup as well. I'm not much for the GTO thing either, but the 940Z and YZ are very nice.

i have some fibreglass molds that i scored from a member off of the site... too bad you're in PDX...

i can always have them shipped if the price is right?

are the molds good? do you do fiberglass? and how much ya want? any pics of the molds? or what the fenders look like when done? thanx man! pm me or email